TE Connectivity 7-2176091-3 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 7-2176091-3 is a 340 Ohm ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility within specified parameters.

Substiute Parts

7-2176091-3

TE Connectivity Passive ProductIn Stock: 11327-2176091-3 Datasheet

Current PartRFQ

ERA-6AEB3400V

Panasonic Electronic ComponentsIn Stock: 6120ERA-6AEB3400V Datasheet

DirectRFQ

RT0805BRD07340RL

YAGEOIn Stock: 5949RT0805BRD07340RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 7-2176091-3 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 340 Ohms
• Tolerance: ±0.1%
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 0805 (2012 Metric)
• Number of Terminations: 2
• Moisture Sensitivity Level: 1 (Unlimited)

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant

Allowable Variation:

• Power Rating: Substitute parts rated at 0.125W (1/8W) are acceptable as they meet or exceed the thermal requirements of circuits designed for 0.25W (1/4W) components in the same package footprint.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 7-2176091-3 (Primary Part)

The TE Connectivity 7-2176091-3 is the specified component with Active product status and 1072 units in stock. This part is ROHS3 compliant and suitable for applications requiring 0.25W power dissipation capacity in the 0805 package format.

Panasonic ERA-6AEB3400V (Substitute)

The Panasonic ERA-6AEB3400V is an Active product with 6022 units in stock. This substitute maintains identical electrical specifications (340 Ohms, ±0.1%, ±25ppm/°C, -55°C ~ 155°C) and mechanical compatibility (0805 package, 2.00mm x 1.25mm). The power rating is 0.125W (1/8W), which is lower than the primary part. This substitute includes Automotive AEC-Q200 qualification. REACH status is listed as REACH Unaffected. Selection of this substitute is appropriate for applications where the 0.125W power rating is sufficient.

YAGEO RT0805BRD07340RL (Substitute)

The YAGEO RT0805BRD07340RL is an Active product with 5899 units in stock. This substitute maintains identical electrical specifications (340 Ohms, ±0.1%, ±25ppm/°C, -55°C ~ 155°C) and mechanical compatibility (0805 package, 2.00mm x 1.25mm). The power rating is 0.125W (1/8W). REACH status is listed as REACH Unaffected. Selection of this substitute is appropriate for applications where the 0.125W power rating is sufficient.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB3400V or YAGEO RT0805BRD07340RL be used as direct replacements for the TE Connectivity 7-2176091-3?

A: Both substitute parts are electrically and mechanically compatible with the TE Connectivity 7-2176091-3. All three components share identical resistance (340 Ohms), tolerance (±0.1%), temperature coefficient (±25ppm/°C), operating temperature range (-55°C ~ 155°C), package format (0805), and RoHS compliance status. The substitute parts are rated at 0.125W (1/8W) compared to the primary part's 0.25W (1/4W) rating. Direct substitution is valid for applications where the lower power rating meets circuit requirements.

Q: What is the difference in physical dimensions between these parts?

A: All three parts share identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). The seated height differs slightly: the TE Connectivity 7-2176091-3 has a maximum seated height of 0.026" (0.65mm), while both substitute parts have a maximum seated height of 0.024" (0.60mm). This minor height difference does not affect PCB layout compatibility.

Q: Are there any compliance or certification differences between these parts?

A: The TE Connectivity 7-2176091-3 and YAGEO RT0805BRD07340RL are both ROHS3 compliant with REACH status listed as Vendor Undefined and REACH Unaffected, respectively. The Panasonic ERA-6AEB3400V is ROHS3 compliant with REACH Unaffected status and includes Automotive AEC-Q200 qualification. All three parts have Moisture Sensitivity Level 1 (Unlimited).

Q: What is the significance of the ±0.1% tolerance specification?

A: The ±0.1% tolerance indicates high precision thin film resistor construction. All three parts maintain this specification, ensuring that the actual resistance value remains within 0.34 Ohms of the nominal 340 Ohm value across the operating temperature range. This tolerance level is suitable for precision analog circuits and measurement applications.

Q: How does the temperature coefficient affect part selection?

A: All three parts share an identical temperature coefficient of ±25ppm/°C. This specification defines the maximum change in resistance per degree Celsius across the operating temperature range of -55°C to 155°C. The matching temperature coefficient ensures consistent circuit performance across thermal variations when substituting between these parts.

Q: Is the Panasonic ERA-6AEB3400V suitable for automotive applications?

A: The Panasonic ERA-6AEB3400V includes Automotive AEC-Q200 qualification, which certifies the component for automotive-grade reliability. The TE Connectivity 7-2176091-3 and YAGEO RT0805BRD07340RL do not list automotive qualifications. Selection of the Panasonic part is required for applications with automotive AEC-Q200 requirements.

Q: What inventory levels are available for each part?

A: The TE Connectivity 7-2176091-3 has 1072 units in stock. The Panasonic ERA-6AEB3400V has 6022 units in stock. The YAGEO RT0805BRD07340RL has 5899 units in stock. All parts are listed as New Original In Stock.