TE Connectivity 7-2176091-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 7-2176091-0 is a 316 Ohms ±0.1% thin film chip resistor rated at 0.25W (1/4W) in 0805 (2012 Metric) surface mount package. This component is manufactured by TE Connectivity Passive Product under the RP73P series and maintains Active product status. The part is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1) and operates across the temperature range of -55°C to 155°C. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit functional alternatives with compatible electrical and mechanical specifications.

Substiute Parts

7-2176091-0

TE Connectivity Passive ProductIn Stock: 16097-2176091-0 Datasheet

Current PartRFQ

ERA-6AEB3160V

Panasonic Electronic ComponentsIn Stock: 22601ERA-6AEB3160V Datasheet

DirectRFQ

RT0805BRD07316RL

YAGEOIn Stock: 1134RT0805BRD07316RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 7-2176091-0 are qualified based on the following critical parameters:

Electrical Compatibility:

• Resistance value: 316 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)

Mechanical Compatibility:

• Package type: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Number of terminations: 2 (exact match required)

Regulatory Compliance:

• RoHS3 compliance (required)
• Moisture sensitivity level: 1 (required)

Power Rating Consideration: Substitute parts with equal or greater power rating (0.25W or higher) are functionally compatible. Substitute parts with lower power ratings (0.125W / 1/8W) are listed as alternatives but operate at reduced power dissipation capacity and must be evaluated for application-specific thermal requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Equivalent: The TE Connectivity 7-2176091-0 and its listed substitutes share identical electrical specifications (316 Ohms, ±0.1% tolerance, ±25ppm/°C temperature coefficient, -55°C to 155°C operating range) and mechanical compatibility (0805 package, thin film composition). All parts are RoHS3 compliant with MSL 1 rating and Active product status.

Power Rating Differential: The Panasonic ERA-6AEB3160V and YAGEO RT0805BRD07316RL are rated at 0.125W (1/8W), compared to the primary part's 0.25W (1/4W) rating. These substitutes are functionally equivalent for applications where power dissipation does not exceed 0.125W. Applications requiring the full 0.25W power rating must retain the TE Connectivity 7-2176091-0 or identify alternative sources with matching 0.25W specifications.

Automotive Qualification: The Panasonic ERA-6AEB3160V carries AEC-Q200 automotive qualification. Selection of this part is appropriate for automotive applications requiring this certification. The TE Connectivity 7-2176091-0 and YAGEO RT0805BRD07316RL do not list automotive qualification in provided specifications.

Regulatory Compliance: All three parts maintain RoHS3 compliance and REACH Unaffected or Vendor Undefined status. All parts are suitable for applications with standard regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can the Panasonic ERA-6AEB3160V or YAGEO RT0805BRD07316RL be used as direct replacements for the TE Connectivity 7-2176091-0?

A: Both parts are electrically and mechanically compatible substitutes. The critical difference is power rating: the substitutes are rated at 0.125W (1/8W) versus the primary part's 0.25W (1/4W). Direct substitution is valid only when circuit power dissipation does not exceed 0.125W. For applications requiring the full 0.25W rating, the TE Connectivity 7-2176091-0 must be used.

Q: Are there dimensional differences between these parts?

A: All three parts use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049" / 2.00mm x 1.25mm). Seated height differs slightly: TE Connectivity 7-2176091-0 is 0.026" (0.65mm) maximum, while the Panasonic and YAGEO parts are 0.024" (0.60mm) maximum. These height differences are within typical PCB assembly tolerances and do not affect interchangeability in standard surface mount applications.

Q: What is the significance of the ±0.1% tolerance specification?

A: The ±0.1% tolerance indicates precision thin film resistor construction. All three parts maintain this tolerance specification, ensuring equivalent accuracy for precision circuit applications. This tolerance is maintained across the full operating temperature range of -55°C to 155°C with a temperature coefficient of ±25ppm/°C.

Q: Is the Panasonic ERA-6AEB3160V suitable for automotive applications?

A: The Panasonic ERA-6AEB3160V carries AEC-Q200 automotive qualification. This part is suitable for automotive applications requiring this certification. The TE Connectivity 7-2176091-0 and YAGEO RT0805BRD07316RL do not list automotive qualification in provided specifications and should not be assumed to meet automotive requirements without additional verification.

Q: What does MSL 1 (Unlimited) moisture sensitivity level mean?

A: MSL 1 indicates the lowest moisture sensitivity classification. All three parts carry MSL 1 rating, meaning they have unlimited shelf life and do not require special moisture control during storage or handling. Standard PCB assembly processes are suitable for all three parts.

Q: Are all three parts RoHS3 compliant?

A: Yes, all three parts are RoHS3 compliant. The TE Connectivity 7-2176091-0 lists RoHS3 compliance. The Panasonic ERA-6AEB3160V and YAGEO RT0805BRD07316RL are both RoHS3 compliant. All parts are suitable for applications with RoHS3 regulatory requirements.