7215TCWZQES Toggle Switch SP3T Equivalent & Substitute Parts

Part Overview

The 7215TCWZQES is a panel-mount toggle switch with SP3T (single pole, three throw) configuration manufactured by C&K. This switch is rated for 5A at 120V AC and 28V DC, featuring a momentary-on-momentary (Mom-On-Mom) switch function with IP67 ingress protection. The product is currently classified as obsolete, making identification of equivalent and substitute parts essential for ongoing maintenance, repair, and system continuity in applications requiring this specific switching topology.

Substiute Parts

7215TCWZQES

C&KIn Stock: 7757215TCWZQES Datasheet

Current PartRFQ

7215TCWZQE

C&KIn Stock: 11247215TCWZQE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7215TCWZQES is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: SP3T topology must be maintained
• Switch Function: Mom-On-Mom operation required
• Current Rating: 5A (AC/DC) minimum
• Voltage Ratings: 120V AC and 28V DC minimum
• Mounting Type: Panel mount configuration
• Actuator Specifications: Standard round actuator, 17.45mm length
• Termination: Solder lug connections
• Panel Interface: Circular 11.91mm diameter cutout with 15/32-32 bushing thread
• Environmental Protection: IP67 rating
• Operating Temperature: -30°C to 85°C range
• Electrical Life: 40,000 cycles minimum
• Compliance: ROHS3 compliant, REACH affected

The 7215TCWZQE meets all substitution criteria and is classified as an equivalent part within the C&K 7000 series.

Parameter Comparison

Engineering Selection Recommendations

The 7215TCWZQE is a direct functional equivalent to the 7215TCWZQES. Both parts are manufactured by C&K within the 7000 series and share identical electrical, mechanical, and environmental specifications. The primary distinction is product status: the 7215TCWZQES is obsolete while the 7215TCWZQE maintains active status with current manufacturing availability.

For applications currently using the 7215TCWZQES, the 7215TCWZQE provides continuity without design modification. Both parts maintain ROHS3 compliance and REACH affected status, ensuring regulatory alignment. The substitute part is available in tray packaging with confirmed inventory of 1030 units.

Frequently Asked Questions (FAQ)

Q: Can the 7215TCWZQE directly replace the 7215TCWZQES in existing applications?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. Panel cutout dimensions, bushing thread specifications, actuator geometry, and electrical ratings are equivalent. No circuit redesign or mechanical modification is required.

Q: What is the difference between these two part numbers?

A: The 7215TCWZQES is classified as obsolete, while the 7215TCWZQE is active. The electrical and mechanical specifications are identical. The difference reflects manufacturing status and availability rather than functional capability.

Q: Are there packaging differences between these parts?

A: Both parts are supplied in tray packaging. No packaging conversion or handling modifications are necessary for substitution.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 7215TCWZQES and 7215TCWZQE are ROHS3 compliant and REACH affected. Regulatory requirements are satisfied by either part.

Q: What is the panel mounting interface for these switches?

A: Both parts use a circular 11.91mm diameter cutout with a 15/32-32 bushing thread. Panel preparation and installation procedures are identical.

Q: Are the electrical ratings identical?

A: Yes. Both parts are rated for 5A at 120V AC and 28V DC with SP3T momentary-on-momentary switching function. Operating temperature range is -30°C to 85°C for both parts.