C&K 7213P3DCKE Toggle Switch SP3T Equivalent & Substitute Parts

Part Overview

The C&K 7213P3DCKE is a panel-mounted toggle switch with SP3T (single-pole, triple-throw) circuit configuration, rated for 0.4VA at 20V AC/DC. This switch features a flat anti-rotation actuator and PC pin termination, designed for applications requiring three-position switching with momentary capability. The 7213P3DCKE is classified as obsolete, making identification of active equivalent parts essential for ongoing procurement and system maintenance.

Substiute Parts

7213P3DCKE

C&KIn Stock: 9517213P3DCKE Datasheet

Current PartRFQ

7213P3DCPE

C&KIn Stock: 7577213P3DCPE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7213P3DCKE is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: SP3T topology must be maintained
• Switch Function: On-On-Mom operation required
• Electrical Ratings: 0.4VA at 20V AC/DC
• Mounting Interface: Panel mount with 1/4-40 bushing thread and 6.35mm circular cutout
• Actuator Specifications: Flat anti-rotation type, 13.21mm length
• Termination: PC pin connection
• Operating Temperature: -30°C to 85°C range
• Electrical Life: 40,000 cycles minimum

The C&K 7213P3DCPE qualifies as a direct substitute based on identical electrical, mechanical, and functional parameters. The primary distinction is product status: the 7213P3DCPE is active production, whereas the 7213P3DCKE is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7213P3DCPE is the direct functional equivalent for the obsolete 7213P3DCKE. Both parts share identical electrical specifications, mechanical interfaces, and operational characteristics within the 7000 series toggle switch family.

Compliance Considerations: The 7213P3DCPE carries RoHS compliance certification and REACH affected status, whereas the 7213P3DCKE is RoHS non-compliant and REACH unaffected. For applications subject to RoHS or REACH regulatory requirements, the 7213P3DCPE is the appropriate selection. For legacy systems or applications without regulatory compliance mandates, either part meets the functional requirements.

Availability: The 7213P3DCPE is in active production with confirmed inventory availability, ensuring long-term procurement viability. The 7213P3DCKE, classified as obsolete, presents supply chain risk for future replenishment.

Frequently Asked Questions (FAQ)

Q: Can the 7213P3DCPE directly replace the 7213P3DCKE in existing designs?

A: Yes. The 7213P3DCPE is mechanically and electrically identical to the 7213P3DCKE. Panel cutout dimensions, bushing thread specifications, actuator geometry, and electrical ratings are equivalent. No design modifications are required.

Q: What is the significance of the RoHS compliance difference?

A: The 7213P3DCKE is RoHS non-compliant; the 7213P3DCPE is RoHS compliant. RoHS compliance is mandatory for products sold into the European Union and many other regulated markets. If your application or end-market requires RoHS certification, the 7213P3DCPE must be used.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts are rated for 0.4VA at 20V AC/DC, feature identical SP3T circuit topology with On-On-Mom switching function, and support 40,000 electrical cycles. Electrical performance is equivalent.

Q: Why is the 7213P3DCKE classified as obsolete?

A: The 7213P3DCKE has been superseded by the 7213P3DCPE within the C&K product portfolio. The 7213P3DCPE offers improved compliance status while maintaining full functional equivalence, making it the current production standard.

Q: What does "Jumper needed to achieve triple throw" mean?

A: Both the 7213P3DCKE and 7213P3DCPE require an internal jumper configuration to achieve full SP3T (triple-throw) functionality. This is a standard design feature of these switch models and does not affect substitution compatibility.

Q: Are the panel mounting interfaces identical?

A: Yes. Both parts use a 1/4-40 bushing thread with a 6.35mm diameter circular panel cutout. Mechanical installation is identical.