Equivalent & Substitute Parts for 7213MD9ALE

Part Overview

The 7213MD9ALE is a toggle switch from C&K's 7000 series, configured as a single-pole triple-throw (SP3T) switch rated for 5A at 120V AC and 28V DC. This through-hole, right-angle mounted component features a standard round actuator with PC pin termination and requires a jumper to achieve triple throw functionality. The part is currently obsolete, making identification of active equivalent models essential for ongoing production and maintenance applications.

Substiute Parts

7213MD9ALE

C&KIn Stock: 11837213MD9ALE Datasheet

Current PartRFQ

7213MD9ARE

C&KIn Stock: 10867213MD9ARE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 7213MD9ARE qualifies as a direct substitute for the 7213MD9ALE based on identical electrical and mechanical parameters. Substitution is determined by the following criteria:

• Circuit configuration (SP3T)
• Switch function (On-On-Mom)
• Current and voltage ratings (5A at 120V AC / 28V DC)
• Mounting configuration (Through Hole, Right Angle)
• Actuator specifications (Standard Round, 6.86mm length)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life rating (40,000 Cycles)

The 7213MD9ARE maintains all functional and mechanical compatibility with the original part while offering active product status and improved compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The 7213MD9ARE is the recommended substitute for the obsolete 7213MD9ALE. Both parts share identical electrical specifications, mechanical dimensions, and functional characteristics, ensuring direct compatibility in existing circuit designs and PCB layouts.

The 7213MD9ARE offers additional advantages through active product status and RoHS compliance certification, supporting long-term supply chain continuity and regulatory alignment. The REACH Affected status of the 7213MD9ARE reflects current environmental compliance frameworks and does not impact functional performance or electrical characteristics.

Selection between these parts should be based on supply availability and regulatory requirements of the end application. For new designs or production runs requiring RoHS compliance, the 7213MD9ARE is the appropriate choice. For legacy systems where RoHS compliance is not mandated, either part meets the electrical and mechanical requirements.

Frequently Asked Questions (FAQ)

Q: Are the 7213MD9ALE and 7213MD9ARE electrically interchangeable?

A: Yes. Both parts are rated for 5A at 120V AC and 28V DC with identical SP3T circuit configuration and On-On-Mom switch function. They can be used interchangeably in applications where these electrical parameters are required.

Q: Do these parts have the same physical footprint?

A: Yes. Both parts feature through-hole, right-angle mounting with identical actuator specifications (Standard Round, 6.86mm length) and PC pin termination. PCB layouts and mechanical assemblies designed for the 7213MD9ALE will accommodate the 7213MD9ARE without modification.

Q: What is the difference between RoHS Compliant and RoHS Non-compliant status?

A: RoHS compliance indicates the part meets restrictions on hazardous substances in electrical and electronic equipment. The 7213MD9ARE meets these requirements, while the 7213MD9ALE does not. For applications subject to RoHS regulations, the 7213MD9ARE is required.

Q: Why is the 7213MD9ALE listed as obsolete?

A: Obsolete status indicates the part is no longer in active production. The 7213MD9ARE represents the current active equivalent from C&K's product line, ensuring continued availability and support.

Q: Can I use the 7213MD9ARE in applications originally designed for the 7213MD9ALE?

A: Yes. The 7213MD9ARE maintains full compatibility with all electrical, mechanical, and functional specifications of the 7213MD9ALE. No circuit modifications or design changes are required.

Q: What does "Jumper needed to achieve triple throw" mean?

A: This feature indicates that the switch requires an external jumper connection to enable full triple-throw functionality. Both the 7213MD9ALE and 7213MD9ARE share this characteristic and require identical jumper configuration.