C&K 7213J1CKE2 Rocker Switch SP3T Equivalent & Substitute Parts

Part Overview

The C&K 7213J1CKE2 is a single-pole triple-throw (SP3T) rocker switch rated for 0.4VA at 20V AC/DC, designed for through-hole mounting applications. This part operates in an On-On-Mom (momentary) configuration with a concave black actuator and requires a jumper to achieve triple throw functionality.

The 7213J1CKE2 carries an obsolete product status. Locating equivalent or substitute components is necessary for ongoing production support, design updates, or inventory replenishment where the original part is no longer actively manufactured.

Substiute Parts

7213J1CKE2

C&KIn Stock: 11697213J1CKE2 Datasheet

Current PartRFQ

7213J1CPE2

C&KIn Stock: 8607213J1CPE2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7213J1CKE2 is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SP3T)
• Switch function (On-On-Mom)
• Current and voltage ratings (0.4VA at 20V AC/DC)
• Mounting type (Through Hole)
• Actuator type and color (Concave, Black)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life rating (40,000 Cycles)
• Approval certifications (cULus)

The C&K 7213J1CPE2 meets all these criteria and qualifies as a direct substitute. Both parts belong to the C&K 7000 series and share identical electrical and mechanical specifications. The primary distinction is product status: the 7213J1CKE2 is obsolete, while the 7213J1CPE2 is active in production.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7213J1CPE2 is the direct substitute for the obsolete 7213J1CKE2. Both parts are electrically and mechanically identical across all functional parameters. Selection of the 7213J1CPE2 is supported by the following factors:

• Active product status ensures ongoing availability and manufacturing support
• RoHS compliance of the 7213J1CPE2 aligns with current regulatory requirements, whereas the 7213J1CKE2 is non-compliant
• REACH affected status of the 7213J1CPE2 indicates compliance with current chemical substance regulations
• Identical electrical ratings, circuit configuration, and mechanical specifications ensure drop-in compatibility in existing designs
• Both parts carry cULus approval certification

For applications where RoHS compliance is mandatory, the 7213J1CPE2 is the required selection. For legacy systems where RoHS non-compliance is acceptable, the 7213J1CPE2 remains the preferred choice due to active production status and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can the 7213J1CPE2 replace the 7213J1CKE2 in existing designs?

A: Yes. The 7213J1CPE2 is a direct substitute with identical electrical and mechanical specifications. No design modifications are required for PCB layout, panel cutout, or circuit operation.

Q: What is the difference between these two parts?

A: The primary differences are product status (obsolete vs. active), RoHS compliance (non-compliant vs. compliant), and REACH status (unaffected vs. affected). Electrical and mechanical performance are identical.

Q: Are there any compatibility concerns with panel mounting?

A: The 7213J1CPE2 specifies panel cutout dimensions of 17.96mm x 10.62mm (rectangular). Verify that existing panel cutouts accommodate these dimensions. The 7213J1CKE2 does not specify panel cutout dimensions in available documentation.

Q: Does the 7213J1CPE2 require the same jumper configuration?

A: Yes. Both parts require a jumper to achieve triple throw functionality. Jumper configuration and placement are identical between the two parts.

Q: What certifications apply to both parts?

A: Both the 7213J1CKE2 and 7213J1CPE2 carry cULus approval. The 7213J1CPE2 additionally meets RoHS and REACH compliance requirements.

Q: Is the 7213J1CPE2 available in the same packaging?

A: Both parts use PC Pin termination and through-hole mounting. Packaging specifications are not differentiated between the two parts.