C&K 7208P3CWAV2ME Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7208P3CWAV2ME is a toggle switch with DPDT (Double Pole Double Throw) configuration, rated for 5A at 120V AC and 28V DC. This panel-mount switch features a right-angle vertical orientation with a flat anti-rotation actuator and IP67 ingress protection. The part is currently classified as obsolete, making identification of equivalent and substitute components essential for ongoing system maintenance and new design implementations where this switch type is required.

Substiute Parts

7208P3CWAV2ME

C&KIn Stock: 11367208P3CWAV2ME Datasheet

Current PartRFQ

7208P3CWAV2SE

C&KIn Stock: 12067208P3CWAV2SE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7208P3CWAV2ME is determined by strict equivalence across the following critical parameters:

• Circuit configuration (DPDT)
• Switch function (On-Mom)
• Current rating (5A AC/DC)
• Voltage ratings (120V AC, 28V DC)
• Mounting type (Panel Mount, Right Angle, Vertical)
• Actuator specifications (Flat Anti-Rotation, 11.43mm length)
• Termination style (PC Pin)
• Panel cutout dimensions (Circular - 6.35mm Dia)
• Bushing thread (1/4-40)
• Ingress protection (IP67)
• Operating temperature range (-30°C ~ 85°C)
• Electrical life (40,000 Cycles)

The C&K 7208P3CWAV2SE meets all these criteria and qualifies as a direct substitute. Both parts belong to the C&K 7000 series and maintain identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The 7208P3CWAV2SE is the direct substitute for the obsolete 7208P3CWAV2ME. Both components are electrically and mechanically identical across all functional parameters. The primary distinction lies in product status and regulatory compliance:

The 7208P3CWAV2ME is obsolete and RoHS non-compliant. The 7208P3CWAV2SE is an active product with RoHS compliance, making it the appropriate choice for new designs and ongoing system support. The 7208P3CWAV2SE is REACH Affected, whereas the original part is REACH Unaffected; however, this reflects current regulatory classification rather than a functional difference.

For applications requiring the DPDT toggle switch configuration with 5A/120V AC and 28V DC ratings in a panel-mount right-angle vertical orientation, the 7208P3CWAV2SE provides full functional equivalence with the added benefit of active product status and modern regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the 7208P3CWAV2SE be used as a direct replacement for the 7208P3CWAV2ME?

A: Yes. Both parts share identical electrical ratings (5A, 120V AC, 28V DC), circuit configuration (DPDT), switch function (On-Mom), and mechanical specifications including mounting type, actuator geometry, termination style, and panel cutout dimensions. The substitution is direct with no design modifications required.

Q: What is the difference between these two parts?

A: The 7208P3CWAV2ME is obsolete and RoHS non-compliant. The 7208P3CWAV2SE is an active product with RoHS compliance. All functional and mechanical parameters are identical.

Q: Are the panel cutout dimensions the same?

A: Yes. Both parts require a circular panel cutout of 6.35mm diameter with a 1/4-40 bushing thread. No panel modifications are necessary when substituting between these parts.

Q: Do both parts have the same ingress protection rating?

A: Yes. Both the 7208P3CWAV2ME and 7208P3CWAV2SE are rated IP67 (Dust Tight, Waterproof) with epoxy sealed terminals.

Q: What is the operating temperature range for these switches?

A: Both parts operate across the range of -30°C to 85°C.

Q: How many electrical cycles are these switches rated for?

A: Both parts are rated for 40,000 electrical cycles.

Q: Why is the original part obsolete?

A: The 7208P3CWAV2ME has been discontinued by C&K. The 7208P3CWAV2SE is the active equivalent and should be used for all new applications and replacements.