Equivalent & Substitute Parts for 7207SYZGI Toggle Switch DPDT

Part Overview

The 7207SYZGI is a panel-mount toggle switch manufactured by C&K, featuring DPDT (Double Pole Double Throw) circuitry with On-Off-Mom switching function. This switch is rated for 5A at 120V AC and 28V DC, with a standard round actuator and solder lug termination. The part is currently active in production with 716 units in stock. Alternative equivalent parts are necessary to address supply chain flexibility, packaging preferences, and specific mechanical or electrical requirements that may vary across applications.

Substiute Parts

7207SYZGI

C&KIn Stock: 7307207SYZGI Datasheet

Current PartRFQ

100DP5T1B1M1QEH

E-SwitchIn Stock: 1820100DP5T1B1M1QEH Datasheet

SimilarRFQ

100DP5T6B11M1QEH

E-SwitchIn Stock: 1271100DP5T6B11M1QEH Datasheet

SimilarRFQ

5648AB

APEM Inc.In Stock: 9985648AB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7207SYZGI is determined by the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration must be DPDT
• Switch function must be On-Off-Mom
• Current rating must support minimum 5A (AC/DC)
• Voltage rating must support minimum 120V AC and 28V DC
• Mounting type must be Panel Mount
• Panel cutout dimensions must be Circular 6.35mm Dia
• Bushing thread must be 1/4-40
• Termination style must be Solder Lug
• Operating temperature range must encompass -30°C ~ 85°C

Identified Substitute Parts:

1. 100DP5T1B1M1QEH (E-Switch) - Meets all primary compatibility criteria with identical electrical ratings and mechanical specifications. Actuator length variance of 0.26mm is within acceptable tolerance for panel-mount applications.

2. 100DP5T6B11M1QEH (E-Switch) - Meets all primary compatibility criteria. Features flat anti-rotation actuator with 12.30mm length, providing enhanced mechanical stability compared to standard round actuator.

3. 5648AB (APEM Inc.) - Meets primary compatibility criteria with enhanced electrical ratings (6A AC, 4A DC at 125V AC, 30V DC). Panel cutout dimension of 6.50mm Dia represents a 0.15mm variance from specification. Operating temperature range extends to -40°C, exceeding minimum requirement.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active products with ROHS3 compliance and meet the electrical and mechanical requirements of the 7207SYZGI.

100DP5T1B1M1QEH Selection: This E-Switch part provides direct electrical and mechanical equivalence with minimal dimensional variance. Suitable for applications requiring standard round actuator geometry and identical performance envelope to the original specification.

100DP5T6B11M1QEH Selection: This E-Switch variant introduces a flat anti-rotation actuator with increased length (12.30mm). Selection is appropriate for applications where actuator anti-rotation properties provide operational advantage or where panel depth accommodates the extended actuator length.

5648AB Selection: This APEM Inc. part offers enhanced electrical ratings (6A AC, 4A DC) and extended operating temperature range (-40°C lower bound). The panel cutout dimension of 6.50mm Dia represents a 0.15mm increase from specification. Selection is appropriate for applications requiring higher current capacity or extended low-temperature operation, provided panel cutout dimensions accommodate the variance.

Frequently Asked Questions (FAQ)

Q: Can 100DP5T1B1M1QEH be used as a direct replacement for 7207SYZGI?

A: Yes. Both parts share identical circuit configuration (DPDT), switch function (On-Off-Mom), electrical ratings (5A AC/DC, 120V AC, 28V DC), mounting type (Panel Mount), panel cutout dimensions (6.35mm Dia), bushing thread (1/4-40), termination style (Solder Lug), and operating temperature range (-30°C ~ 85°C). Actuator length variance of 0.26mm is within acceptable tolerance for panel-mount applications.

Q: What is the difference between 100DP5T1B1M1QEH and 100DP5T6B11M1QEH?

A: Both E-Switch parts are electrically identical. The primary difference is the actuator type: 100DP5T1B1M1QEH features a standard round actuator (10.41mm length), while 100DP5T6B11M1QEH features a flat anti-rotation actuator (12.30mm length). The flat anti-rotation design provides enhanced mechanical stability and prevents unintended rotation.

Q: Can 5648AB replace 7207SYZGI in all applications?

A: 5648AB meets all primary compatibility criteria with enhanced electrical ratings and extended low-temperature operation. However, the panel cutout dimension is 6.50mm Dia compared to 6.35mm Dia specification. Verify panel cutout dimensions accommodate this 0.15mm variance before selection.

Q: What packaging differences exist among these parts?

A: 7207SYZGI is supplied in Tray packaging. All three substitute parts (100DP5T1B1M1QEH, 100DP5T6B11M1QEH, and 5648AB) are supplied in Bulk packaging. Confirm packaging requirements for your procurement and assembly processes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts (100DP5T1B1M1QEH, 100DP5T6B11M1QEH, and 5648AB) are ROHS3 compliant, matching the compliance status of 7207SYZGI.

Q: Which substitute part offers the longest electrical life?

A: 5648AB offers 50,000 electrical cycles compared to 40,000 cycles for 7207SYZGI and both E-Switch alternatives. This represents a 25% increase in rated electrical life.