C&K 7207SPDZQE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7207SPDZQE is a panel-mount toggle switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This switch features an anti-rotation brass actuator with epoxy-sealed terminals and is designed for on-off-momentary switching applications. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified when electrical ratings, mechanical mounting interfaces, and circuit configurations align within specified tolerances.

Substiute Parts

7207SPDZQE

C&KIn Stock: 9047207SPDZQE Datasheet

Current PartRFQ

100DP5T1B1M1QEH

E-SwitchIn Stock: 1820100DP5T1B1M1QEH Datasheet

SimilarRFQ

100DP5T6B11M1QEH

E-SwitchIn Stock: 1271100DP5T6B11M1QEH Datasheet

SimilarRFQ

5648AB

APEM Inc.In Stock: 9985648AB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7207SPDZQE is determined by the following critical parameters:

Primary Matching Criteria:

• Circuit configuration: DPDT
• Current rating: Minimum 5A (AC/DC)
• Voltage rating: Minimum 120V AC, 28V DC
• Mounting type: Panel Mount
• Panel cutout diameter: 6.35mm Circular
• Bushing thread: 1/4-40
• Termination style: Solder Lug
• Switch function: On-Off-Momentary

Acceptable Variations:

• Actuator type and length (within mechanical envelope constraints)
• Actuator material composition (brass with different plating)
• Electrical life ratings equal to or exceeding 40,000 cycles
• Operating temperature range equal to or exceeding -30°C to 85°C
• Packaging format (Tray or Bulk)

The three identified substitute parts meet these criteria with minor variations in actuator design and electrical life specifications.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain ROHS3 compliance and meet the core electrical and mechanical requirements of the 7207SPDZQE. Selection between substitutes depends on specific application constraints:

100DP5T1B1M1QEH (E-Switch): Matches all electrical specifications with a standard round actuator. Actuator length of 10.41mm is shorter than the original part, requiring verification of panel cutout depth clearance. REACH status is unaffected.

100DP5T6B11M1QEH (E-Switch): Provides the closest actuator length match at 12.30mm with flat anti-rotation design. Electrical specifications are identical to the main part. REACH status is unaffected.

5648AB (APEM Inc.): Exceeds electrical ratings with 6A AC and 4A DC capacity, plus extended electrical life of 50,000 cycles. Operating temperature range extends to -40°C. Panel cutout diameter is 6.50mm, requiring verification of panel hole compatibility. REACH status is unaffected.

All parts are active products with current production status and available inventory.

Frequently Asked Questions (FAQ)

Q: Can the 100DP5T1B1M1QEH replace the 7207SPDZQE in all applications?

A: The 100DP5T1B1M1QEH meets all electrical and mechanical specifications. The primary consideration is actuator length: at 10.41mm versus the original 12.45mm, panel cutout depth must accommodate the shorter actuator without interference.

Q: What is the significance of the panel cutout diameter difference in the 5648AB?

A: The 5648AB has a 6.50mm circular cutout versus 6.35mm for the other parts. Existing panel holes sized for 6.35mm will not accommodate this part without modification.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitutes carry ROHS3 compliance certification, matching the original part's regulatory status.

Q: How do actuator type variations affect substitution?

A: Actuator type (anti-rotation, standard round, flat anti-rotation) affects mechanical engagement and user interface feel but does not impact electrical performance. Selection depends on application requirements for actuator retention and tactile feedback.

Q: What is the difference between the two E-Switch options?

A: Both E-Switch parts (100DP5T1B1M1QEH and 100DP5T6B11M1QEH) have identical electrical ratings. The primary difference is actuator design: standard round versus flat anti-rotation, and length variation (10.41mm versus 12.30mm). The 100DP5T6B11M1QEH provides closer dimensional alignment to the original part.

Q: Does the 5648AB's higher electrical life rating affect compatibility?

A: Higher electrical life (50,000 cycles versus 40,000) represents improved durability and does not create compatibility issues. This is a beneficial characteristic for long-service applications.

Q: Are packaging differences (Tray versus Bulk) significant for substitution?

A: Packaging format affects order quantity and handling but does not impact electrical or mechanical compatibility. Selection depends on procurement and inventory management requirements.