C&K 7207SHZBE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7207SHZBE is a panel-mount toggle switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 0.4VA at 20V AC/DC. This switch is designed for On-Off-Mom (momentary) applications and features epoxy-sealed solder lug terminals. The part is currently active in production with 781 units in stock. Equivalent and substitute parts are identified when mechanical compatibility, electrical ratings, and functional requirements align within acceptable operating parameters for the intended application.

Substiute Parts

7207SHZBE

C&KIn Stock: 8547207SHZBE Datasheet

Current PartRFQ

100DP5T1B1M1QEH

E-SwitchIn Stock: 1820100DP5T1B1M1QEH Datasheet

SimilarRFQ

100DP5T6B11M1QEH

E-SwitchIn Stock: 1271100DP5T6B11M1QEH Datasheet

SimilarRFQ

5648AB

APEM Inc.In Stock: 9985648AB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 7207SHZBE are qualified based on the following criteria:

Mechanical Compatibility: Panel cutout diameter (6.35mm or 6.50mm), bushing thread (1/4-40), and solder lug termination must accommodate the same mounting footprint and PCB interface.

Electrical Compatibility: Circuit configuration must be DPDT with On-Off-Mom function. Substitute parts must support the application voltage and current requirements. Parts with higher voltage and current ratings are acceptable for applications operating within the 7207SHZBE's 0.4VA / 20V specification.

Environmental & Compliance: Operating temperature range must encompass or exceed -30°C to 85°C. RoHS3 compliance is required. Epoxy-sealed terminals are standard across all qualified substitutes.

Actuator Compatibility: Standard round or flat anti-rotation actuator types are acceptable. Actuator length variations (10.41mm to 12.30mm) are within acceptable panel-mount tolerances.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts (100DP5T1B1M1QEH, 100DP5T6B11M1QEH, and 5648AB) are qualified alternatives to the 7207SHZBE based on mechanical and electrical compatibility within the specified operating envelope.

E-Switch 100DP5T1B1M1QEH and 100DP5T6B11M1QEH: Both parts feature identical electrical ratings (5A at 120V AC, 28V DC) and mechanical mounting specifications. The primary difference is actuator type: 100DP5T1B1M1QEH uses a standard round actuator (10.41mm length), while 100DP5T6B11M1QEH uses a flat anti-rotation actuator (12.30mm length). Both are ROHS3 compliant and active products. Selection between these two depends on panel design and actuator preference.

APEM Inc. 5648AB: This part provides higher electrical ratings (6A AC, 4A DC at 125V AC / 30V DC) and extended electrical life (50,000 cycles versus 40,000). The panel cutout diameter is 6.50mm, requiring a slightly larger mounting hole. Operating temperature range extends to -40°C. ROHS3 compliant and active product status.

All substitute parts maintain solder lug termination, 1/4-40 bushing thread, and epoxy-sealed terminal construction consistent with the original 7207SHZBE specification.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP5T1B1M1QEH directly replace the C&K 7207SHZBE?

A: Yes. Both parts share identical panel cutout diameter (6.35mm), bushing thread (1/4-40), solder lug termination, and DPDT On-Off-Mom circuit configuration. The E-Switch part has higher voltage and current ratings, which are acceptable for applications operating within the 7207SHZBE's 0.4VA / 20V specification. Operating temperature range and RoHS3 compliance are equivalent.

Q: What is the difference between 100DP5T1B1M1QEH and 100DP5T6B11M1QEH?

A: Both E-Switch parts have identical electrical ratings and mounting specifications. The difference is the actuator type: 100DP5T1B1M1QEH features a standard round actuator at 10.41mm length, while 100DP5T6B11M1QEH features a flat anti-rotation actuator at 12.30mm length. Selection depends on panel design requirements and actuator preference for your application.

Q: Why does the APEM 5648AB have a 6.50mm panel cutout instead of 6.35mm?

A: The 6.50mm cutout is within acceptable tolerance for 1/4-40 bushing thread panel-mount switches. This 0.15mm difference requires verification that your panel mounting hole can accommodate the slightly larger diameter. All other mechanical and electrical specifications remain compatible.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The C&K 7207SHZBE and all three substitute parts (100DP5T1B1M1QEH, 100DP5T6B11M1QEH, and 5648AB) are ROHS3 compliant.

Q: What is the electrical life difference between the original and substitute parts?

A: The C&K 7207SHZBE and both E-Switch parts are rated for 40,000 electrical cycles. The APEM 5648AB is rated for 50,000 cycles, providing extended operational life for high-cycle applications.

Q: Can I use a substitute part with higher voltage and current ratings in a low-voltage application?

A: Yes. All substitute parts have voltage and current ratings that exceed the 7207SHZBE specification (0.4VA / 20V). Using a higher-rated part in an application operating within the original specification is electrically safe and does not degrade performance.