C&K 7207SCWZGE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7207SCWZGE is an active-status toggle switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This panel-mount switch features an on-off-momentary function with epoxy-sealed solder lug terminals and IP67 ingress protection. Equivalent and substitute parts are identified based on matching electrical ratings, mechanical mounting specifications, and functional circuit topology to ensure direct interchangeability in applications requiring DPDT toggle switching functionality.

Substiute Parts

7207SCWZGE

C&KIn Stock: 10127207SCWZGE Datasheet

Current PartRFQ

100DP5T1B1M1QEH

E-SwitchIn Stock: 1820100DP5T1B1M1QEH Datasheet

SimilarRFQ

100DP5T6B11M1QEH

E-SwitchIn Stock: 1271100DP5T6B11M1QEH Datasheet

SimilarRFQ

5648AB

APEM Inc.In Stock: 9985648AB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 7207SCWZGE are qualified based on the following critical parameters that determine functional interchangeability:

Primary Matching Criteria:

• Circuit configuration: DPDT
• Switch function: On-Off-Mom
• Current rating: 5A minimum (AC/DC)
• Voltage rating: 120V AC minimum, 28V DC minimum
• Mounting type: Panel Mount
• Panel cutout diameter: 6.35mm (±0.15mm tolerance acceptable)
• Bushing thread: 1/4-40
• Termination style: Solder Lug
• Operating temperature range: -30°C to 85°C minimum

Secondary Compatibility Factors:

• Actuator length variation within panel-mount envelope
• Actuator type (Standard Round or Flat Anti-Rotation)
• Electrical life rating (40,000 cycles minimum)
• RoHS3 compliance status
• Epoxy-sealed terminal construction

Substitutes meeting all primary criteria are electrically and mechanically interchangeable. Variations in secondary factors do not affect circuit functionality but may influence panel aesthetics or specific application constraints.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Fully Qualified):

The E-Switch 100DP5T1B1M1QEH and 100DP5T6B11M1QEH are direct electrical and mechanical equivalents to the 7207SCWZGE. Both parts maintain identical voltage and current ratings, circuit configuration, mounting specifications, and operating temperature range. The primary difference is actuator geometry: 100DP5T1B1M1QEH features a standard round actuator at 10.41mm length, while 100DP5T6B11M1QEH provides a flat anti-rotation actuator at 12.30mm length. Selection between these variants depends on panel-mount envelope constraints and actuator preference. Both are ROHS3 compliant and active-status products.

Compatible Substitute (Minor Parameter Variance):

The APEM Inc. 5648AB is compatible with the 7207SCWZGE with the following considerations: AC current rating is 6A (exceeds 5A requirement), DC current rating is 4A (below 5A specification), AC voltage rating is 125V (exceeds 120V requirement), and DC voltage rating is 30V (exceeds 28V requirement). Panel cutout diameter is 6.50mm versus 6.35mm, requiring minor panel modification. Operating temperature range extends to -40°C (exceeds -30°C minimum). Electrical life is 50,000 cycles (exceeds 40,000 cycles). This part is suitable for AC-dominant applications where DC current demand does not exceed 4A. ROHS3 compliance and active product status are confirmed.

Compliance Verification:

All substitute parts maintain ROHS3 compliance and active product status, ensuring regulatory alignment and ongoing manufacturer support. The 7207SCWZGE provides IP67 ingress protection; substitute parts do not specify ingress protection ratings. Applications requiring sealed-environment operation should confirm environmental sealing specifications with the substitute part manufacturer.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP5T1B1M1QEH directly replace the C&K 7207SCWZGE without circuit modification?

A: Yes. The 100DP5T1B1M1QEH is a direct electrical and mechanical equivalent. Identical voltage ratings (120V AC, 28V DC), current ratings (5A AC/DC), circuit configuration (DPDT), switch function (On-Off-Mom), mounting specifications (panel mount, 1/4-40 bushing thread, 6.35mm cutout), and termination style (solder lug) ensure drop-in compatibility. No circuit redesign is required.

Q: What is the difference between the two E-Switch substitute parts?

A: Both 100DP5T1B1M1QEH and 100DP5T6B11M1QEH are electrically identical. The distinction is mechanical: 100DP5T1B1M1QEH has a standard round actuator (10.41mm length), while 100DP5T6B11M1QEH has a flat anti-rotation actuator (12.30mm length). Selection depends on panel envelope constraints and whether anti-rotation features are required for the application.

Q: Is the APEM Inc. 5648AB suitable for all applications using the 7207SCWZGE?

A: The 5648AB is suitable for AC-dominant applications. DC current rating is 4A, which is below the 7207SCWZGE specification of 5A. If the application requires 5A DC switching, the 5648AB is not recommended. Panel cutout diameter is 6.50mm versus 6.35mm, requiring minor panel modification. Confirm environmental sealing requirements, as ingress protection is not specified for the 5648AB.

Q: What packaging options are available for substitute parts?

A: The C&K 7207SCWZGE is supplied in Tray packaging. E-Switch 100DP5T1B1M1QEH and 100DP5T6B11M1QEH are supplied in Bulk packaging. APEM Inc. 5648AB is supplied in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility; it influences procurement and inventory management only.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The C&K 7207SCWZGE and all three substitute parts (E-Switch 100DP5T1B1M1QEH, E-Switch 100DP5T6B11M1QEH, and APEM Inc. 5648AB) are ROHS3 compliant, ensuring regulatory alignment for applications subject to RoHS directives.

Q: Does the 7207SCWZGE provide environmental sealing that substitute parts may not?

A: The 7207SCWZGE specifies IP67 ingress protection (dust tight, waterproof). Substitute parts do not provide specified ingress protection ratings. Applications requiring sealed-environment operation should confirm environmental sealing specifications with the substitute part manufacturer before implementation.

Q: What is the electrical life difference between the main part and substitutes?

A: The C&K 7207SCWZGE is rated for 40,000 electrical cycles. E-Switch 100DP5T1B1M1QEH and 100DP5T6B11M1QEH are also rated for 40,000 cycles. APEM Inc. 5648AB is rated for 50,000 cycles, providing extended operational life. All ratings exceed typical industrial switching requirements.