C&K 7207P3Y4ZGE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7207P3Y4ZGE is an active production toggle switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This panel-mount switch features a flat anti-rotation actuator, solder lug termination, and epoxy sealed terminals suitable for industrial control and switching applications. Substitute parts are identified based on matching electrical ratings, mechanical compatibility, and functional equivalence within the DPDT toggle switch category.

Substiute Parts

7207P3Y4ZGE

C&KIn Stock: 12327207P3Y4ZGE Datasheet

Current PartRFQ

100DP5T1B1M1QEH

E-SwitchIn Stock: 1820100DP5T1B1M1QEH Datasheet

SimilarRFQ

100DP5T6B11M1QEH

E-SwitchIn Stock: 1271100DP5T6B11M1QEH Datasheet

SimilarRFQ

5648AB

APEM Inc.In Stock: 9985648AB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7207P3Y4ZGE is determined by the following critical parameters:

Primary Matching Criteria:

• Circuit configuration: DPDT
• Switch function: On-Off-Mom
• Current rating: Minimum 5A (AC/DC)
• Voltage rating: Minimum 120V AC, 28V DC
• Mounting type: Panel Mount
• Panel cutout diameter: 6.35mm Circular
• Bushing thread: 1/4-40
• Termination style: Solder Lug

Secondary Compatibility Factors:

• Operating temperature range: -30°C minimum
• Electrical life: 40,000 cycles minimum
• Epoxy sealed terminals feature
• RoHS3 compliance

All identified substitute parts meet or exceed these parameters. Variations in actuator type, actuator length, and manufacturer do not affect functional substitution when primary criteria are satisfied.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active production components with ROHS3 compliance and meet or exceed the electrical and mechanical specifications of the 7207P3Y4ZGE.

E-Switch 100DP5T1B1M1QEH: Matches all primary electrical parameters with identical current and voltage ratings. Features standard round actuator with 10.41mm length. REACH unaffected status. Suitable for direct substitution in applications where actuator type variation is acceptable.

E-Switch 100DP5T6B11M1QEH: Matches all primary electrical parameters with identical current and voltage ratings. Features flat anti-rotation actuator (matching the main part) with 12.30mm length. REACH unaffected status. Recommended for applications requiring actuator geometry consistency with the original design.

APEM Inc. 5648AB: Exceeds electrical specifications with 6A AC rating and 125V AC voltage rating. Provides extended operating temperature range (-40°C to 85°C) and increased electrical life (50,000 cycles). Panel cutout diameter is 6.50mm, requiring minor panel modification. REACH unaffected status. Suitable for applications requiring enhanced performance margins.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP5T1B1M1QEH replace the C&K 7207P3Y4ZGE directly?

A: Yes. Both parts share identical DPDT circuit configuration, On-Off-Mom function, 5A current rating, 120V AC and 28V DC voltage ratings, panel mount configuration, 1/4-40 bushing thread, and solder lug termination. The primary difference is actuator type (standard round vs. flat anti-rotation), which does not affect electrical function.

Q: What is the difference between the two E-Switch options?

A: Both E-Switch parts (100DP5T1B1M1QEH and 100DP5T6B11M1QEH) have identical electrical ratings and mechanical compatibility. The 100DP5T1B1M1QEH features a standard round actuator with 10.41mm length, while the 100DP5T6B11M1QEH features a flat anti-rotation actuator with 12.30mm length, matching the original part's actuator geometry.

Q: Why does the APEM 5648AB have a different panel cutout diameter?

A: The APEM 5648AB requires a 6.50mm circular panel cutout compared to the 6.35mm required by the C&K 7207P3Y4ZGE. This 0.15mm difference necessitates panel modification. All other mechanical parameters (bushing thread 1/4-40, solder lug termination) remain compatible.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The C&K 7207P3Y4ZGE and all three substitute parts are ROHS3 compliant, meeting environmental and hazardous substance restrictions.

Q: What is the difference in electrical life between parts?

A: The C&K 7207P3Y4ZGE and both E-Switch parts are rated for 40,000 electrical cycles. The APEM 5648AB provides extended electrical life at 50,000 cycles, offering increased durability for high-cycle applications.

Q: Can I use the APEM 5648AB in a 120V AC application?

A: Yes. The APEM 5648AB is rated for 125V AC, which exceeds the 120V AC requirement of the original application. It is suitable for 120V AC circuits.