C&K 7201TZBE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7201TZBE is an active production toggle switch featuring DPDT (Double Pole Double Throw) circuitry with On-On switching function. Rated for 0.4VA at 20V AC/DC, this panel-mount component is designed for low-power switching applications requiring reliable contact performance over extended operational life. The part is ROHS3 compliant and maintains unlimited moisture sensitivity rating (MSL 1).

Substitute parts may be required due to inventory constraints, regional availability, or application-specific performance requirements that exceed the baseline electrical ratings of the primary component.

Substiute Parts

7201TZBE

C&KIn Stock: 12747201TZBE Datasheet

Current PartRFQ

100DP1T8B13M1QEH

E-SwitchIn Stock: 6804100DP1T8B13M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E-Switch 100DP1T8B13M1QEH qualifies as a functional substitute based on the following alignment criteria:

Matching Parameters:

• Circuit configuration: DPDT
• Switch function: On-On
• Mounting type: Panel Mount
• Panel cutout dimensions: Circular 11.91mm diameter
• Bushing thread: 15/32-32
• Termination style: Solder Lug
• Operating temperature range: -30°C to 85°C
• Actuator type: Standard Round
• Material specification: Brass, Chrome Plated
• Feature set: Epoxy Sealed Terminals
• RoHS compliance: ROHS3 Compliant
• MSL rating: 1 (Unlimited)

Electrical Performance Differences: The substitute part exceeds the baseline electrical specifications of the primary component, providing higher current capacity (5A versus 0.4VA) and higher AC voltage rating (120V versus 20V). These differences represent performance enhancements suitable for applications requiring greater electrical headroom.

Parameter Comparison

Engineering Selection Recommendations

Both components maintain active production status and ROHS3 compliance, ensuring regulatory alignment for current manufacturing environments. The C&K 7201TZBE provides higher electrical cycle life (100,000 cycles versus 40,000 cycles), making it preferable for applications requiring extended operational durability in repetitive switching scenarios.

The E-Switch 100DP1T8B13M1QEH offers elevated electrical performance margins, with current capacity and voltage ratings substantially exceeding the primary component specifications. This substitution is appropriate when application requirements demand higher electrical headroom or when C&K inventory is unavailable.

Mechanical compatibility is confirmed across both parts: identical panel cutout dimensions (11.91mm circular), matching bushing thread specification (15/32-32), and comparable actuator geometry ensure direct mechanical interchangeability in panel-mount installations.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP1T8B13M1QEH directly replace the C&K 7201TZBE in existing designs?

A: Mechanical compatibility is confirmed. Both components feature identical panel cutout dimensions (11.91mm circular) and bushing thread specifications (15/32-32), enabling direct physical substitution. Electrical compatibility depends on application requirements. The E-Switch part provides higher current and voltage ratings, making it suitable for applications operating within or below the C&K specifications.

Q: What is the primary electrical difference between these components?

A: The C&K 7201TZBE is rated for 0.4VA at 20V AC/DC. The E-Switch 100DP1T8B13M1QEH is rated for 5A at 120V AC and 28V DC. The substitute part provides significantly higher electrical capacity, suitable for applications requiring greater power handling capability.

Q: Are both components RoHS compliant?

A: Yes. Both the C&K 7201TZBE and E-Switch 100DP1T8B13M1QEH are ROHS3 compliant, meeting current regulatory requirements for electronic component manufacturing and assembly.

Q: What is the difference in electrical life between these parts?

A: The C&K 7201TZBE is rated for 100,000 electrical cycles, while the E-Switch 100DP1T8B13M1QEH is rated for 40,000 cycles. For applications requiring extended cycle life, the C&K component is the preferred selection.

Q: Are the actuator dimensions identical?

A: Actuator lengths differ slightly: C&K 7201TZBE measures 17.45mm, while the E-Switch 100DP1T8B13M1QEH measures 18.00mm. Both use standard round actuators with brass, chrome-plated construction. This minor dimensional variance does not affect panel-mount compatibility.

Q: What packaging formats are available?

A: The C&K 7201TZBE is supplied in Tray packaging. The E-Switch 100DP1T8B13M1QEH is supplied in Bulk packaging. Packaging selection may influence procurement logistics and inventory management strategies.