C&K 7201SPHZBE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7201SPHZBE is an active production toggle switch with DPDT (Double Pole Double Throw) configuration, rated for 0.4VA at 20V AC/DC. This panel-mount switch features anti-rotation actuator design with epoxy-sealed terminals and is ROHS3 compliant. Substitute parts are identified based on matching electrical ratings, mechanical compatibility, and functional equivalence within the toggle switch DPDT category.

Substiute Parts

7201SPHZBE

C&KIn Stock: 7577201SPHZBE Datasheet

Current PartRFQ

100DP1T1B1M1REH

E-SwitchIn Stock: 1774100DP1T1B1M1REH Datasheet

SimilarRFQ

100DP1T6B11M1QEH

E-SwitchIn Stock: 1515100DP1T6B11M1QEH Datasheet

SimilarRFQ

100DP1T6B11M1REH

E-SwitchIn Stock: 1090100DP1T6B11M1REH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 7201SPHZBE are grouped based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Critical Parameters for Substitution:

• Circuit configuration: DPDT
• Switch function: On-On
• Current rating: 0.4VA (AC/DC)
• Voltage rating: 20V AC/DC
• Mounting type: Panel Mount
• Panel cutout dimensions: Circular 6.35mm Dia
• Bushing thread: 1/4-40
• Termination style: Solder Lug
• Operating temperature: -30°C ~ 85°C

Substitute Categories:

Group 1 - Full Electrical & Mechanical Equivalents (0.4VA, 20V):

• E-Switch 100DP1T6B11M1REH
• E-Switch 100DP1T1B1M1REH

Group 2 - Higher Electrical Rating (5A, 120V AC / 28V DC):

• E-Switch 100DP1T6B11M1QEH

Parts in Group 1 maintain identical electrical specifications and are direct substitutes. The part in Group 2 exceeds the electrical requirements of the main part and is suitable for applications requiring higher current or voltage capacity within the same mechanical form factor.

Parameter Comparison

Engineering Selection Recommendations

For Direct Electrical Equivalence (0.4VA, 20V):

E-Switch 100DP1T1B1M1REH and E-Switch 100DP1T6B11M1REH are electrically equivalent to the 7201SPHZBE. Both are ROHS3 compliant and active production parts. Selection between these two E-Switch alternatives depends on actuator geometry requirements: 100DP1T1B1M1REH features a standard round actuator at 10.41mm length, while 100DP1T6B11M1REH features a flat anti-rotation actuator at 12.30mm length. The 7201SPHZBE uses an anti-rotation actuator design; therefore, 100DP1T6B11M1REH provides closer mechanical alignment.

For Higher Electrical Capacity:

E-Switch 100DP1T6B11M1QEH exceeds the electrical specifications of the 7201SPHZBE, rated for 5A at 120V AC and 28V DC. This part is suitable for applications requiring higher current or voltage margins while maintaining identical mechanical form factor and panel mounting compatibility. All three E-Switch alternatives are ROHS3 compliant and active production status.

Frequently Asked Questions (FAQ)

Q: Can E-Switch 100DP1T1B1M1REH directly replace the C&K 7201SPHZBE?

A: Yes, electrically and mechanically. Both are DPDT On-On switches rated for 0.4VA at 20V AC/DC with identical panel cutout dimensions (6.35mm Dia), bushing thread (1/4-40), and solder lug termination. The primary difference is actuator type: 100DP1T1B1M1REH uses a standard round actuator versus the anti-rotation design of the 7201SPHZBE. Verify actuator geometry compatibility with your panel design.

Q: What is the difference between E-Switch 100DP1T1B1M1REH and 100DP1T6B11M1REH?

A: Both are electrically identical (0.4VA, 20V). The difference is actuator design: 100DP1T1B1M1REH has a standard round actuator at 10.41mm length, while 100DP1T6B11M1REH has a flat anti-rotation actuator at 12.30mm length. The 7201SPHZBE uses anti-rotation design, making 100DP1T6B11M1REH the closer mechanical match.

Q: Can I use E-Switch 100DP1T6B11M1QEH as a substitute?

A: Yes, for applications requiring higher electrical capacity. This part is rated for 5A at 120V AC and 28V DC, exceeding the 0.4VA at 20V specification of the 7201SPHZBE. Mechanical compatibility is maintained: identical panel cutout, bushing thread, and solder lug termination. Use this part only if your application requires the higher electrical ratings.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The 7201SPHZBE and all three E-Switch substitute parts (100DP1T1B1M1REH, 100DP1T6B11M1REH, 100DP1T6B11M1QEH) are ROHS3 compliant and active production status.

Q: What is the electrical life difference between the main part and substitutes?

A: The 7201SPHZBE is rated for 100,000 electrical cycles. All three E-Switch alternatives are rated for 40,000 cycles. For applications requiring extended cycle life, verify that 40,000 cycles meets your operational requirements.

Q: Do the substitute parts have the same packaging?

A: The 7201SPHZBE is supplied in Tray packaging. All three E-Switch substitute parts are supplied in Bulk packaging. Confirm packaging requirements for your procurement and assembly processes.