Toggle Switch DPDT 7201SPHCGE Equivalent & Substitute Parts

Part Overview

The C&K 7201SPHCGE is an active-status toggle switch with DPDT (Double Pole Double Throw) configuration rated for 5A at 120V AC and 28V DC. This panel-mount switch features anti-rotation actuator design, epoxy sealed terminals, and PC pin termination. The part is ROHS3 compliant and maintains 100,000 electrical cycles. Substitute parts are identified based on matching circuit topology, electrical ratings, mechanical mounting compatibility, and termination standards.

Substiute Parts

7201SPHCGE

C&KIn Stock: 10417201SPHCGE Datasheet

Current PartRFQ

100DP1T1B1M2QEH

E-SwitchIn Stock: 8034100DP1T1B1M2QEH Datasheet

SimilarRFQ

100DP1T6B15M2RE

E-SwitchIn Stock: 891100DP1T6B15M2RE Datasheet

SimilarRFQ

2-1825138-4

TE Connectivity ALCOSWITCH SwitchesIn Stock: 18262-1825138-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Compatibility Requirements:

• Circuit configuration: DPDT topology required
• Switch function: On-On operation
• Mounting type: Panel mount with 1/4-40 bushing thread
• Panel cutout: Circular 6.35mm diameter
• Termination: PC pin style
• Operating temperature: -30°C to 85°C range
• RoHS compliance: ROHS3 status

Electrical Rating Considerations: Substitute parts are grouped based on current and voltage ratings. The main part operates at 5A/120V AC. Substitutes with lower electrical ratings (0.4VA/20V) represent reduced-capacity alternatives suitable only for applications with lower power requirements.

Identified Substitute Parts:

• 100DP1T1B1M2QEH (E-Switch): Matches primary electrical ratings (5A/120V)
• 100DP1T6B15M2RE (E-Switch): Reduced electrical ratings (0.4VA/20V)
• 2-1825138-4 (TE Connectivity): Reduced electrical ratings (0.4VA/20V)

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Electrical Rating Match): The 100DP1T1B1M2QEH from E-Switch provides electrical rating equivalence to the 7201SPHCGE, matching 5A/120V AC specifications. Both parts maintain ROHS3 compliance and active product status. This substitute is suitable for applications requiring identical electrical performance within the specified voltage and current envelope.

Reduced-Capacity Alternatives: The 100DP1T6B15M2RE and 2-1825138-4 are substitutes only for applications with lower electrical requirements (0.4VA/20V maximum). These parts maintain mechanical and termination compatibility but operate at reduced power levels. Selection of reduced-capacity substitutes requires confirmation that application electrical demands do not exceed 0.4VA and 20V ratings.

Compliance Considerations: All identified substitutes maintain ROHS3 compliance and active product status. The 2-1825138-4 carries REACH Affected designation matching the main part, while E-Switch substitutes are REACH Unaffected. Regulatory requirements for specific applications determine compliance suitability.

Frequently Asked Questions (FAQ)

Q: Can 100DP1T1B1M2QEH directly replace 7201SPHCGE in existing designs? A: Yes. The 100DP1T1B1M2QEH matches the primary electrical ratings (5A/120V AC, 28V DC), circuit configuration (DPDT), mounting specifications (panel mount, 1/4-40 bushing, 6.35mm cutout), and termination style (PC pin). Both parts are ROHS3 compliant and active status. Physical verification of actuator length (10.41mm vs. 10.67mm) and actuator type differences (Standard Round vs. Anti-Rotation) is required for mechanical clearance confirmation.

Q: What are the limitations of 100DP1T6B15M2RE and 2-1825138-4 substitutes? A: Both parts operate at reduced electrical ratings (0.4VA/20V maximum) compared to the main part (5A/120V). These substitutes are compatible only for low-power applications. The 2-1825138-4 exhibits significantly lower electrical life (6,000 cycles vs. 100,000 cycles), limiting suitability for high-cycle applications.

Q: Are packaging differences between Tray and Bulk significant for component selection? A: Packaging format (Tray vs. Bulk) affects logistics and handling but does not impact electrical or mechanical compatibility. Component performance and specifications remain identical regardless of packaging type.

Q: How do actuator type differences affect substitution? A: The main part features Anti-Rotation actuator design, while 100DP1T1B1M2QEH uses Standard Round actuator. Both designs maintain DPDT On-On functionality and panel-mount compatibility. Actuator type selection depends on application requirements for rotational constraint and user interface preference.

Q: What compliance factors should guide substitute selection? A: All substitutes maintain ROHS3 compliance and active product status. The 2-1825138-4 is REACH Affected (matching the main part), while E-Switch substitutes are REACH Unaffected. Applications subject to REACH regulations may require the 2-1825138-4 or main part. ECCN classification (EAR99) is consistent across all parts.