C&K 7201SHV2ME Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7201SHV2ME is a panel-mount toggle switch with DPDT (Double Pole Double Throw) configuration, rated for 5A at 120V AC and 28V DC. This switch features a standard round actuator with epoxy sealed terminals and is designed for On-On switching applications. The 7201SHV2ME is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

7201SHV2ME

C&KIn Stock: 11727201SHV2ME Datasheet

Current PartRFQ

7201SHV2SE

C&KIn Stock: 8527201SHV2SE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 7201SHV2ME is determined by strict equivalence across electrical and mechanical parameters. The substitute part must maintain identical specifications in the following critical areas:

• Circuit configuration (DPDT)
• Switch function (On-On)
• Current and voltage ratings (5A AC/DC, 120V AC, 28V DC)
• Mounting type and panel interface (Panel Mount, 6.35mm circular cutout, 1/4-40 bushing thread)
• Actuator specifications (Standard Round, 10.67mm length)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life rating (100,000 cycles)
• Physical features (Epoxy sealed terminals)

The C&K 7201SHV2SE meets all these criteria and serves as a direct substitute for the 7201SHV2ME within the same 7000 series product line.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7201SHV2SE is the appropriate substitute for the obsolete 7201SHV2ME. Both parts are electrically and mechanically equivalent across all functional parameters. The 7201SHV2SE offers the advantage of active product status, ensuring continued availability and supply chain reliability.

The 7201SHV2SE achieves RoHS compliance, whereas the 7201SHV2ME does not. For applications subject to RoHS regulatory requirements, the 7201SHV2SE is the mandated selection. The 7201SHV2SE is also REACH Affected, indicating compliance with REACH substance restrictions. Both parts share identical ECCN and HTSUS classifications, maintaining consistent export control and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can the 7201SHV2SE directly replace the 7201SHV2ME in existing applications?

A: Yes. The 7201SHV2SE is electrically and mechanically equivalent to the 7201SHV2ME. All electrical ratings, switching characteristics, mounting dimensions, and actuator specifications are identical. No circuit modifications or mechanical redesign is required.

Q: What is the primary difference between these two parts?

A: The 7201SHV2ME is obsolete, while the 7201SHV2SE is an active product. The 7201SHV2SE also achieves RoHS compliance and is REACH Affected, whereas the 7201SHV2ME is RoHS non-compliant and REACH Unaffected.

Q: Are there any compatibility concerns with panel cutout dimensions or bushing threads?

A: No. Both parts use identical panel interface specifications: a 6.35mm diameter circular cutout and 1/4-40 bushing thread. Direct mechanical substitution is possible without panel modification.

Q: Does the 7201SHV2SE meet RoHS requirements?

A: Yes. The 7201SHV2SE is RoHS Compliant. If your application or regulatory environment requires RoHS compliance, the 7201SHV2SE satisfies this requirement, whereas the 7201SHV2ME does not.

Q: Are the electrical ratings identical between these parts?

A: Yes. Both parts are rated for 5A at 120V AC and 28V DC, with identical operating temperature ranges (-30°C to 85°C) and electrical life specifications (100,000 cycles).