7201P3H3ABE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The 7201P3H3ABE is an active production toggle switch manufactured by C&K, classified as a DPDT (Double Pole Double Throw) panel mount component with right angle orientation. This switch is designed for On-On applications requiring 0.4VA at 20V AC/DC operation. The part is stocked in tray packaging with 706 units currently available as new original inventory.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and circuit functionality can be maintained across alternative manufacturers while meeting the same operational requirements.

Substiute Parts

7201P3H3ABE

C&KIn Stock: 7277201P3H3ABE Datasheet

Current PartRFQ

100DP1T3B1M6REH

E-SwitchIn Stock: 2119100DP1T3B1M6REH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7201P3H3ABE is determined by strict equivalence across the following critical parameters:

• Circuit configuration must be DPDT
• Switch function must be On-On
• Current rating must be 0.4VA (AC/DC)
• Voltage ratings must be 20V AC and 20V DC minimum
• Mounting type must be Panel Mount, Right Angle
• Panel cutout dimensions must be Circular - 6.35mm Dia
• Bushing thread must be 1/4-40
• Termination style must be PC Pin
• Operating temperature range must encompass -30°C ~ 85°C
• RoHS3 compliance is required

The substitute part 100DP1T3B1M6REH (E-Switch) meets all mandatory electrical and mechanical parameters for direct substitution in applications requiring DPDT toggle switch functionality at the specified voltage and current ratings.

Parameter Comparison

Engineering Selection Recommendations

Both the 7201P3H3ABE and 100DP1T3B1M6REH are active production components with ROHS3 compliance and EAR99 classification. Selection between these parts should be based on:

• Availability and lead time requirements
• Packaging format preference (Tray vs. Bulk)
• Actuator design differences (Flat Anti-Rotation vs. Standard Round)
• Electrical life cycle specifications (100,000 cycles vs. 40,000 cycles)
• REACH compliance status (Affected vs. Unaffected)

Both parts satisfy the core electrical and mechanical requirements for DPDT On-On toggle switch applications at 0.4VA and 20V operation.

Frequently Asked Questions (FAQ)

Q: Can the 100DP1T3B1M6REH replace the 7201P3H3ABE in existing designs?

A: Yes. Both parts meet identical electrical specifications (DPDT, On-On, 0.4VA, 20V AC/DC), mechanical mounting requirements (Panel Mount Right Angle, 6.35mm circular cutout, 1/4-40 bushing thread), and termination style (PC Pin). Physical differences in actuator design do not affect electrical substitution.

Q: What are the differences between these two parts?

A: The primary differences are actuator type (Flat Anti-Rotation vs. Standard Round), actuator length (10.92mm vs. 13.97mm), electrical life rating (100,000 vs. 40,000 cycles), packaging format (Tray vs. Bulk), and REACH compliance status. Electrical and mechanical compatibility remain equivalent.

Q: Are both parts RoHS compliant?

A: Yes. Both the 7201P3H3ABE and 100DP1T3B1M6REH are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the panel cutout requirement for installation?

A: Both parts require a circular panel cutout of 6.35mm diameter with a 1/4-40 bushing thread for secure panel mount installation.

Q: Which part has longer electrical life?

A: The 7201P3H3ABE (C&K) is rated for 100,000 electrical cycles, while the 100DP1T3B1M6REH (E-Switch) is rated for 40,000 cycles. Application cycle requirements should determine selection if electrical life is a critical design factor.