C&K 7201P3DZGE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7201P3DZGE is an active production toggle switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This panel-mount switch features a flat anti-rotation actuator and epoxy-sealed solder lug terminals. The part is in active product status with 974 units in current inventory. Substitute parts are identified when equivalent electrical ratings, mechanical mounting specifications, and circuit configurations align with application requirements.

Substiute Parts

7201P3DZGE

C&KIn Stock: 10647201P3DZGE Datasheet

Current PartRFQ

100DP1T1B1M1REH

E-SwitchIn Stock: 1774100DP1T1B1M1REH Datasheet

SimilarRFQ

100DP1T6B11M1QEH

E-SwitchIn Stock: 1515100DP1T6B11M1QEH Datasheet

SimilarRFQ

100DP1T6B11M1REH

E-SwitchIn Stock: 1090100DP1T6B11M1REH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 7201P3DZGE are classified based on strict alignment with the following critical parameters:

Primary Substitution Criteria:

• Circuit configuration: DPDT
• Switch function: On-On
• Mounting type: Panel Mount
• Panel cutout dimensions: Circular 6.35mm diameter
• Bushing thread: 1/4-40
• Termination style: Solder Lug
• Operating temperature range: -30°C to 85°C
• Actuator material: Brass, Chrome Plated
• Features: Epoxy Sealed Terminals

Electrical Rating Compatibility: Substitutes are grouped by electrical performance alignment. Parts matching the full 5A/120V AC and 28V DC ratings provide direct replacement capability. Parts with reduced electrical ratings (0.4VA/20V) are listed as alternatives for applications with lower power requirements.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Full Electrical Rating Match): The E-Switch 100DP1T6B11M1QEH provides direct substitution for the 7201P3DZGE. Both parts share identical electrical ratings (5A/120V AC, 28V DC), DPDT circuit configuration, flat anti-rotation actuator type, and panel mount specifications. Both are ROHS3 compliant and active production status. The 100DP1T6B11M1QEH has reduced electrical life (40,000 cycles versus 100,000 cycles) and is REACH Unaffected compared to the main part's REACH Affected status.

Alternative Substitutes (Reduced Electrical Rating): The E-Switch parts 100DP1T6B11M1REH and 100DP1T1B1M1REH are suitable only for applications with electrical requirements not exceeding 0.4VA at 20V AC/DC. These parts maintain identical mechanical mounting specifications, panel cutout dimensions, bushing thread, and termination style. The 100DP1T1B1M1REH features a standard round actuator instead of flat anti-rotation, affecting panel presentation and rotation resistance characteristics.

All substitute parts maintain ROHS3 compliance and active product status, supporting long-term supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP1T6B11M1QEH directly replace the C&K 7201P3DZGE? A: Yes, for applications requiring 5A at 120V AC or 28V DC. Both parts share identical electrical ratings, DPDT circuit configuration, panel mount specifications, and solder lug termination. The primary difference is reduced electrical life (40,000 versus 100,000 cycles) and REACH compliance status.

Q: What is the difference between the E-Switch 100DP1T6B11M1QEH and 100DP1T6B11M1REH? A: The 100DP1T6B11M1QEH is rated for 5A/120V AC and 28V DC, while the 100DP1T6B11M1REH is rated for 0.4VA/20V AC and DC. Both share identical actuator type (flat anti-rotation), actuator length (12.30mm), and mechanical mounting specifications. Selection depends on application voltage and current requirements.

Q: Can I use the E-Switch 100DP1T1B1M1REH as a substitute? A: The 100DP1T1B1M1REH is suitable only for applications with electrical requirements not exceeding 0.4VA at 20V AC/DC. It features a standard round actuator instead of flat anti-rotation and a shorter actuator length (10.41mm versus 13.21mm on the main part). Mechanical mounting compatibility is maintained through identical panel cutout dimensions and bushing thread specifications.

Q: Are all substitute parts RoHS compliant? A: Yes, all listed substitute parts are ROHS3 compliant, matching the compliance status of the C&K 7201P3DZGE.

Q: What packaging is available for substitute parts? A: The E-Switch substitute parts are supplied in bulk packaging, compared to tray packaging for the C&K 7201P3DZGE. Packaging format does not affect electrical or mechanical performance.

Q: How do electrical life ratings affect part selection? A: The C&K 7201P3DZGE is rated for 100,000 electrical cycles, while all E-Switch substitutes are rated for 40,000 cycles. Applications requiring extended cycle life should prioritize the main part or evaluate duty cycle requirements against substitute part specifications.