C&K 7201MYCBE22 Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The C&K 7201MYCBE22 is a panel-mount toggle switch with DPDT (Double Pole Double Throw) configuration, rated for 0.4VA at 20V AC/DC. This switch is classified as Active product status and is designed for applications requiring reliable on-on switching functionality with a standard round actuator. Finding equivalent substitute parts is necessary to ensure supply chain continuity, optimize inventory management, and maintain design flexibility across manufacturing batches.

Substiute Parts

7201MYCBE22

C&KIn Stock: 10727201MYCBE22 Datasheet

Current PartRFQ

100DP1T2B3M2REH

E-SwitchIn Stock: 2129100DP1T2B3M2REH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the C&K 7201MYCBE22 are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Electrical Parameters (Critical):

• Circuit configuration: DPDT
• Switch function: On-On
• Current rating: 0.4VA (AC/DC)
• Voltage rating: 20V AC and 20V DC

Mechanical Parameters (Critical):

• Mounting type: Panel Mount
• Actuator type: Standard Round
• Actuator length: 5.08mm
• Panel cutout dimensions: Circular - 6.35mm Dia
• Bushing thread: 1/4-40
• Termination style: PC Pin

Environmental & Compliance Parameters:

• Operating temperature range: -30°C ~ 85°C
• RoHS3 Compliance
• Moisture Sensitivity Level: 1 (Unlimited)

Parts matching all critical electrical and mechanical parameters are classified as direct substitutes. Variations in features (such as actuator material or terminal sealing) do not disqualify substitution when core parameters align.

Parameter Comparison

Engineering Selection Recommendations

The E-Switch 100DP1T2B3M2REH qualifies as a direct electrical and mechanical substitute for the C&K 7201MYCBE22. Both parts are Active product status and meet ROHS3 compliance requirements.

Selection Considerations:

The C&K 7201MYCBE22 offers 100,000 electrical life cycles, while the E-Switch 100DP1T2B3M2REH provides 40,000 cycles. Applications requiring extended operational life should prioritize the C&K part. The E-Switch variant features epoxy sealed terminals, which may provide enhanced environmental protection in specific applications.

REACH compliance status differs between the two parts: the C&K part is REACH Affected, while the E-Switch part is REACH Unaffected. This distinction is relevant for supply chain and regulatory documentation purposes in REACH-regulated markets.

Both parts share identical electrical ratings, mechanical dimensions, and environmental operating parameters, confirming substitution compatibility at the functional level.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP1T2B3M2REH replace the C&K 7201MYCBE22 in existing designs?

A: Yes. Both parts meet identical electrical specifications (0.4VA, 20V AC/DC, DPDT On-On), mechanical dimensions (6.35mm panel cutout, 1/4-40 bushing thread, 5.08mm actuator length), and environmental ratings (-30°C ~ 85°C). Panel mount compatibility and PC pin termination are identical.

Q: What is the difference in electrical life between these parts?

A: The C&K 7201MYCBE22 is rated for 100,000 cycles, while the E-Switch 100DP1T2B3M2REH is rated for 40,000 cycles. Select based on application duty cycle requirements.

Q: Are there packaging differences between these parts?

A: Yes. The C&K 7201MYCBE22 is supplied in Tray packaging, while the E-Switch 100DP1T2B3M2REH is supplied in Bulk packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Do both parts meet RoHS compliance?

A: Yes. Both the C&K 7201MYCBE22 and E-Switch 100DP1T2B3M2REH are ROHS3 Compliant.

Q: What is the significance of REACH status differences?

A: The C&K part is REACH Affected, while the E-Switch part is REACH Unaffected. This affects regulatory documentation and supply chain compliance in REACH-regulated regions. Verify requirements for your target market.

Q: Are the actuator materials the same?

A: Yes. Both parts feature brass actuators with chrome plating. The C&K part includes a black actuator finish, while the E-Switch part features epoxy sealed terminals as a distinguishing characteristic.