Toggle Switch DPDT 7201MY9AGE Equivalent & Substitute Parts

Part Overview

The C&K 7201MY9AGE is an active-status toggle switch with DPDT (Double Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This through-hole, right-angle mounted component features epoxy sealed terminals and operates across -30°C to 85°C. The part is ROHS3 compliant and REACH affected, making it suitable for regulated applications requiring documented component traceability.

Substitute parts are identified when equivalent electrical ratings, mechanical mounting, and functional specifications align with the main part's core parameters, enabling direct replacement in circuit designs.

Substiute Parts

7201MY9AGE

C&KIn Stock: 10987201MY9AGE Datasheet

Current PartRFQ

100DP1T2B4M6QE

E-SwitchIn Stock: 8284100DP1T2B4M6QE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7201MY9AGE is determined by strict alignment across the following core parameters:

• Circuit configuration (DPDT)
• Switch function (On-On)
• Current and voltage ratings (5A at 120V AC / 28V DC)
• Mounting type and orientation (Through Hole, Right Angle)
• Actuator specifications (Standard Round, 5.08mm length)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Actuator material (Brass, Chrome Plated)
• Terminal sealing (Epoxy Sealed)
• Non-illuminated configuration

The E-Switch 100DP1T2B4M6QE meets all substitution criteria across these parameters, enabling functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the C&K 7201MY9AGE and E-Switch 100DP1T2B4M6QE are active-status components with ROHS3 compliance and MSL 1 ratings, supporting deployment in regulated environments.

The 7201MY9AGE carries REACH Affected status, requiring compliance documentation in applications subject to REACH regulations. The 100DP1T2B4M6QE is REACH Unaffected, eliminating this regulatory requirement for certain supply chains.

Electrical life differs between the two parts: the 7201MY9AGE is rated for 100,000 cycles, while the 100DP1T2B4M6QE is rated for 40,000 cycles. Selection should account for application duty cycle requirements.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP1T2B4M6QE directly replace the C&K 7201MY9AGE in existing designs?

A: Yes. Both parts share identical electrical ratings (5A at 120V AC / 28V DC), circuit configuration (DPDT On-On), mounting type (Through Hole, Right Angle), actuator specifications (Standard Round, 5.08mm), termination style (PC Pin), and operating temperature range (-30°C to 85°C). PCB footprints and panel cutout dimensions are compatible.

Q: What is the difference in electrical life between these parts?

A: The C&K 7201MY9AGE is rated for 100,000 switching cycles, while the E-Switch 100DP1T2B4M6QE is rated for 40,000 cycles. Applications requiring extended cycle life should prioritize the 7201MY9AGE.

Q: Does REACH status affect component selection?

A: REACH status is a regulatory consideration. The 7201MY9AGE is REACH Affected and requires compliance documentation for certain markets. The 100DP1T2B4M6QE is REACH Unaffected. Selection depends on supply chain and end-market regulatory requirements.

Q: Are packaging differences significant?

A: The 7201MY9AGE is supplied in Tray packaging, while the 100DP1T2B4M6QE is supplied in Bulk packaging. This affects handling and storage but does not impact electrical or mechanical compatibility.

Q: What certifications apply to both parts?

A: Both parts are ROHS3 compliant and carry MSL 1 (Unlimited) ratings, supporting deployment in regulated applications without moisture sensitivity constraints.