Toggle Switch DPDT 7201MD8AV2BE Equivalent & Substitute Parts

Part Overview

The 7201MD8AV2BE is an active production toggle switch manufactured by C&K, configured as a Double Pole Double Throw (DPDT) switch with On-On functionality. This through-hole, right-angle vertical mounted component is rated for 0.4VA at 20V AC/DC operation. The part remains in active product status with 762 units currently in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, lead time considerations, or application-specific packaging needs.

Key Parameters

Parameter	Value
Manufacturer Part Number	7201MD8AV2BE
Manufacturer	C&K
Circuit Configuration	DPDT
Switch Function	On-On
Current Rating	0.4VA (AC/DC)
Voltage Rating - AC	20 V
Voltage Rating - DC	20 V
Mounting Type	Through Hole, Right Angle, Vertical
Termination Style	PC Pin
Operating Temperature Range	-30°C ~ 85°C
Electrical Life	100,000 Cycles
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the 7201MD8AV2BE is determined by the following critical parameters:

Circuit Configuration Match: Both the main part and substitute must maintain DPDT topology with On-On switching function to preserve circuit behavior.

Mounting and Termination Compatibility: Through-hole, right-angle vertical orientation with PC pin termination must be preserved to ensure PCB compatibility without redesign.

Electrical Operating Range: The substitute must support the application voltage and current requirements. The 7201MD8AV2BE operates at 0.4VA maximum; substitutes rated for higher current and voltage ratings remain compatible for this application as they operate within their derating curve.

Environmental Specifications: Operating temperature range of -30°C to 85°C and RoHS3 compliance are baseline requirements for industrial and commercial applications.

Actuator Geometry: Standard round actuator type with similar physical dimensions ensures mechanical fit within panel cutouts and user interface consistency.

The identified substitute 100DP1T2B4M7QE from E-Switch meets these core substitution criteria while offering higher electrical ratings and different packaging options.

Parameter Comparison

Parameter	7201MD8AV2BE (C&K)	100DP1T2B4M7QE (E-Switch)	Compatibility Notes
Circuit Configuration	DPDT	DPDT	Matched
Switch Function	On-On	On-On	Matched
Current Rating	0.4VA (AC/DC)	5A (AC/DC)	Substitute rated higher; suitable for this application
Voltage Rating - AC	20 V	120 V	Substitute rated higher; suitable for this application
Voltage Rating - DC	20 V	28 V	Substitute rated higher; suitable for this application
Mounting Type	Through Hole, Right Angle, Vertical	Through Hole, Right Angle, Vertical	Matched
Termination Style	PC Pin	PC Pin	Matched
Actuator Type	Standard Round	Standard Round	Matched
Actuator Length	6.86mm	5.08mm	Substitute actuator shorter; verify panel cutout clearance
Operating Temperature	-30°C ~ 85°C	-30°C ~ 85°C	Matched
Electrical Life	100,000 Cycles	40,000 Cycles	Main part rated higher; substitute acceptable for lower-cycle applications
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Matched
Packaging	Tray	Bulk	Different packaging; verify procurement requirements

Engineering Selection Recommendations

Primary Part (7201MD8AV2BE): Recommended for applications requiring 100,000 electrical cycle life and where tray packaging aligns with supply chain processes. ROHS3 compliance and REACH affected status confirm regulatory alignment for industrial markets.

Substitute Part (100DP1T2B4M7QE): Suitable when bulk packaging is acceptable and electrical cycle life requirement does not exceed 40,000 cycles. Higher voltage and current ratings provide design margin for the 0.4VA, 20V application. ROHS3 compliance is maintained; however, REACH unaffected status may simplify documentation for certain supply chains.

Critical Consideration: Actuator length difference (6.86mm vs. 5.08mm) requires verification against panel cutout dimensions and mechanical assembly constraints before substitution.

Frequently Asked Questions (FAQ)

Q: Can the 100DP1T2B4M7QE substitute for the 7201MD8AV2BE in all applications?

A: Electrical substitution is valid for applications operating at or below 0.4VA and 20V. The shorter actuator length (5.08mm vs. 6.86mm) must be verified against panel cutout specifications and mechanical assembly requirements. Electrical cycle life is reduced from 100,000 to 40,000 cycles; applications requiring higher cycle counts should retain the primary part.

Q: What are the key differences between these two DPDT switches?

A: Both switches share identical circuit topology (DPDT On-On), mounting style (through-hole right-angle vertical), and termination (PC pin). The substitute offers higher electrical ratings (5A/120V AC vs. 0.4VA/20V AC) and different packaging (bulk vs. tray). The primary part provides longer electrical life (100,000 vs. 40,000 cycles) and longer actuator length.

Q: Are there any compliance or regulatory differences?

A: Both parts are ROHS3 compliant and operate within -30°C to 85°C. The primary part is REACH affected; the substitute is REACH unaffected. Both carry EAR99 ECCN classification. Verify REACH documentation requirements for your specific supply chain.

Q: Does the actuator length difference affect PCB design?

A: The 1.78mm actuator length difference may affect panel cutout clearance and user interface feel. Verify that the shorter actuator (5.08mm) provides adequate clearance within your panel assembly before substitution.

Q: Can I use the substitute in high-cycle applications?

A: No. The substitute is rated for 40,000 electrical cycles compared to the primary part's 100,000 cycles. Applications requiring extended cycle life should use the 7201MD8AV2BE.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message