Toggle Switch DPDT 7201L2YCGE22 Equivalent & Substitute Parts

Part Overview

The C&K 7201L2YCGE22 is an active production toggle switch with DPDT (Double Pole Double Throw) configuration rated for 5A at 120V AC and 28V DC. This panel-mount switch features a standard round actuator with PC pin termination and is designed for general-purpose switching applications requiring reliable electrical performance across industrial and commercial environments. Substitute parts are identified for applications where component availability, packaging preferences, or specific electrical parameter requirements necessitate alternative sourcing.

Substiute Parts

7201L2YCGE22

C&KIn Stock: 11647201L2YCGE22 Datasheet

Current PartRFQ

100DP1T1B1M2QEH

E-SwitchIn Stock: 8034100DP1T1B1M2QEH Datasheet

SimilarRFQ

100DP1T6B15M2RE

E-SwitchIn Stock: 891100DP1T6B15M2RE Datasheet

SimilarRFQ

2-1825138-4

TE Connectivity ALCOSWITCH SwitchesIn Stock: 18262-1825138-4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following critical parameters: circuit configuration (DPDT), switch function (On-On), mounting type (panel mount), panel cutout dimensions (6.35mm circular), bushing thread (1/4-40), termination style (PC pin), and operating temperature range (-30°C to 85°C).

The substitute parts are grouped into two categories based on electrical rating compatibility:

Category A - Full Electrical Rating Match: E-Switch 100DP1T1B1M2QEH maintains identical current (5A) and voltage ratings (120V AC / 28V DC) as the primary part, ensuring direct substitution for applications requiring maximum electrical capacity.

Category B - Reduced Electrical Rating: E-Switch 100DP1T6B15M2RE and TE Connectivity 2-1825138-4 operate at reduced ratings (0.4VA at 20V AC/DC). These parts are suitable only for applications where the circuit operates within these lower electrical parameters and do not provide equivalent capacity for the primary part's full 5A/120V specification.

Parameter Comparison

Engineering Selection Recommendations

E-Switch 100DP1T1B1M2QEH is the primary substitute for the C&K 7201L2YCGE22 when component availability or packaging requirements (bulk vs. tray) necessitate sourcing from an alternative manufacturer. This part maintains full electrical equivalence with identical 5A/120V AC and 28V DC ratings, identical mechanical interface specifications, and active product status with ROHS3 compliance. The reduced electrical life rating (40,000 cycles versus 100,000 cycles) should be evaluated against application duty cycle requirements.

E-Switch 100DP1T6B15M2RE and TE Connectivity 2-1825138-4 are suitable only for applications where circuit operating parameters do not exceed 0.4VA at 20V AC/DC. These parts share identical mechanical mounting characteristics and panel interface specifications but operate at significantly reduced electrical capacity. Selection of these parts requires confirmation that the application circuit operates within the reduced voltage and current parameters. The TE Connectivity part exhibits substantially lower electrical life (6,000 cycles) and should be evaluated for duty cycle compatibility.

All substitute parts maintain ROHS3 compliance and active production status, ensuring long-term availability and regulatory alignment with the primary part.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100DP1T1B1M2QEH directly replace the C&K 7201L2YCGE22 in existing designs?

A: Yes, the E-Switch 100DP1T1B1M2QEH provides direct electrical and mechanical substitution. Both parts share identical DPDT configuration, 5A/120V AC and 28V DC ratings, panel cutout dimensions (6.35mm circular), bushing thread (1/4-40), PC pin termination, and operating temperature range (-30°C to 85°C). The primary difference is packaging (bulk versus tray) and reduced electrical life (40,000 versus 100,000 cycles). Verify that the application duty cycle is compatible with the lower cycle rating.

Q: What are the limitations of the E-Switch 100DP1T6B15M2RE and TE Connectivity 2-1825138-4 substitutes?

A: Both parts operate at reduced electrical ratings (0.4VA at 20V AC/DC) compared to the primary part's 5A/120V AC specification. These parts are suitable only for low-power switching applications where circuit voltage does not exceed 20V and current does not exceed 0.4VA. The TE Connectivity part also exhibits significantly lower electrical life (6,000 cycles). These parts are not suitable for applications requiring the full 5A/120V capacity of the primary part.

Q: Are all substitute parts RoHS compliant?

A: Yes, all listed substitute parts are ROHS3 compliant, matching the compliance status of the primary C&K 7201L2YCGE22 part.

Q: What is the impact of different actuator lengths on panel mount installation?

A: The primary part features a 13.97mm actuator length, while substitute parts range from 10.41mm to 12.30mm. Actuator length affects the distance the toggle extends from the panel surface. Verify that the application panel thickness and user interface design accommodate the specific actuator length of the selected substitute part. All parts share identical panel cutout dimensions (6.35mm circular) and bushing thread (1/4-40), ensuring mechanical compatibility at the panel interface.

Q: How do electrical life ratings affect component selection?

A: The C&K 7201L2YCGE22 is rated for 100,000 electrical cycles, while E-Switch substitutes are rated for 40,000 cycles and the TE Connectivity part for 6,000 cycles. Electrical life indicates the number of switching operations the part can withstand before performance degradation. Applications with high switching frequency or long operational life requirements should prioritize parts with higher electrical life ratings or conduct duty cycle analysis to confirm compatibility.

Q: What packaging options are available for these parts?

A: The primary C&K 7201L2YCGE22 is supplied in tray packaging. E-Switch and TE Connectivity substitute parts are supplied in bulk packaging. Confirm that bulk packaging is compatible with your procurement, storage, and assembly processes.