Equivalent & Substitute Parts for 7201L2CWZGE2

Part Overview

The 7201L2CWZGE2 is a toggle switch manufactured by C&K, classified as a DPDT (Double Pole Double Throw) panel mount switch rated for 5A at 120V AC and 28V DC. This switch is designed for applications requiring reliable on-on switching functionality with IP67 ingress protection. The part is currently active in production with 996 units in stock. Alternative equivalent parts may be required due to inventory constraints, application-specific packaging needs, or supply chain considerations.

Substiute Parts

7201L2CWZGE2

C&KIn Stock: 10837201L2CWZGE2 Datasheet

Current PartRFQ

100DP1T4B1M1QEH

E-SwitchIn Stock: 1534100DP1T4B1M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7201L2CWZGE2 is determined by the following critical parameters:

• Circuit Configuration: Must be DPDT to maintain electrical functionality
• Switch Function: Must be On-On to preserve operational behavior
• Current Rating: Must support minimum 5A (AC/DC)
• Voltage Ratings: Must support minimum 120V AC and 28V DC
• Mounting Type: Must be Panel Mount with compatible mechanical interface
• Panel Cutout Dimensions: Must be Circular 6.35mm Dia for panel compatibility
• Bushing Thread: Must be 1/4-40 for mechanical fit
• Termination Style: Must be Solder Lug for circuit board integration
• Operating Temperature Range: Must encompass -30°C ~ 85°C minimum
• RoHS Compliance: Must maintain ROHS3 Compliant status for regulatory requirements

The substitute part 100DP1T4B1M1QEH from E-Switch meets all critical substitution criteria within these parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the 7201L2CWZGE2 and 100DP1T4B1M1QEH are active production parts with ROHS3 compliance, meeting current regulatory requirements. The primary selection criteria are:

7201L2CWZGE2 (C&K): Select this part when IP67 ingress protection is required and extended electrical life of 100,000 cycles is specified. This part is suitable for sealed or harsh environment applications.

100DP1T4B1M1QEH (E-Switch): Select this part when standard environmental conditions apply and packaging format (bulk vs. tray) aligns with procurement requirements. This part provides equivalent electrical performance within standard operating conditions.

Both parts maintain identical electrical ratings, mechanical interfaces, and regulatory compliance status. Selection between them should be based on specific application environmental requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can 100DP1T4B1M1QEH directly replace 7201L2CWZGE2 in all applications?

A: Yes, for applications where IP67 ingress protection is not a design requirement. Both parts share identical electrical ratings, circuit configuration, and mechanical mounting interfaces. Verify that the 16.26mm actuator length of the E-Switch part does not conflict with panel clearance constraints in your specific application.

Q: What is the difference in actuator length between these parts?

A: The C&K 7201L2CWZGE2 has a 13.97mm actuator length, while the E-Switch 100DP1T4B1M1QEH has a 16.26mm actuator length. This 2.29mm difference may affect panel ergonomics or clearance in space-constrained designs.

Q: Does the difference in electrical life affect substitution suitability?

A: The C&K part is rated for 100,000 cycles versus 40,000 cycles for the E-Switch part. For applications with high switching frequency or extended service life requirements, the C&K part provides greater operational longevity. For standard-duty applications, both parts are suitable.

Q: Are there packaging differences between these parts?

A: Yes. The 7201L2CWZGE2 is supplied in Tray packaging, while the 100DP1T4B1M1QEH is supplied in Bulk packaging. Verify that your procurement and assembly processes accommodate the available packaging format.

Q: What is the significance of the IP67 rating on the C&K part?

A: IP67 classification indicates dust-tight and waterproof performance. If your application involves exposure to moisture, dust, or submersion, the C&K 7201L2CWZGE2 is the appropriate selection. The E-Switch part does not specify ingress protection rating.