Rocker Switch DPDT 7201J1AV3GE2 Equivalent & Substitute Parts

Part Overview

The C&K 7201J1AV3GE2 is an active production rocker switch featuring DPDT (Double Pole Double Throw) circuitry with On-On switching function. This through-hole mounted component is rated for 5A AC/DC at 120V AC and 28V DC, designed for applications requiring reliable dual-circuit switching with epoxy sealed terminals. Substitute parts are identified to provide equivalent electrical and mechanical performance for applications where the original part is unavailable or where alternative sourcing is required.

Substiute Parts

7201J1AV3GE2

C&KIn Stock: 11207201J1AV3GE2 Datasheet

Current PartRFQ

300DP1J1BLKM7QEIO

E-SwitchIn Stock: 1374300DP1J1BLKM7QEIO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7201J1AV3GE2 is determined by strict equivalence across the following critical parameters:

• Circuit configuration: DPDT only
• Switch function: On-On operation
• Current rating: 5A AC/DC minimum
• Voltage ratings: 120V AC and 28V DC minimum
• Mounting configuration: Through hole, right angle, vertical orientation
• Actuator type and color: Concave (Standard V), black
• Termination style: PC pin
• Operating temperature range: -30°C to 85°C minimum
• Terminal sealing: Epoxy sealed

The E-Switch 300DP1J1BLKM7QEIO meets all critical electrical and mechanical parameters required for direct substitution in applications using the C&K 7201J1AV3GE2.

Parameter Comparison

Engineering Selection Recommendations

Both the C&K 7201J1AV3GE2 and E-Switch 300DP1J1BLKM7QEIO are active production components with ROHS3 compliance and MSL 1 rating, suitable for applications without moisture sensitivity constraints. The primary distinction between these parts is electrical life rating: the C&K component is rated for 100,000 cycles while the E-Switch substitute is rated for 40,000 cycles. Selection should be based on application duty cycle requirements. Both parts carry identical electrical specifications, mounting geometry, and environmental operating ranges, ensuring mechanical and electrical interchangeability in circuit designs.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 300DP1J1BLKM7QEIO be used as a direct replacement for the C&K 7201J1AV3GE2?

A: Yes, the E-Switch part is electrically and mechanically equivalent. Both components feature identical DPDT On-On switching, 5A AC/DC current rating at 120V AC / 28V DC, through-hole right-angle vertical mounting, black concave actuators, PC pin termination, and epoxy sealed terminals. No circuit modifications are required.

Q: What is the difference in electrical life between these parts?

A: The C&K 7201J1AV3GE2 is rated for 100,000 switching cycles, while the E-Switch 300DP1J1BLKM7QEIO is rated for 40,000 cycles. Applications with high switching frequency should account for this difference in component selection.

Q: Are both parts RoHS compliant?

A: Yes, both the C&K 7201J1AV3GE2 and E-Switch 300DP1J1BLKM7QEIO are ROHS3 compliant with MSL 1 (unlimited) moisture sensitivity level.

Q: Do these parts require different panel cutout dimensions?

A: The C&K 7201J1AV3GE2 specifies rectangular panel cutout dimensions of 17.96mm x 10.62mm. The E-Switch part does not provide panel cutout specifications in available documentation. Physical verification is recommended before finalizing panel design modifications.

Q: What certifications do these parts carry?

A: The C&K 7201J1AV3GE2 carries cULus approval. The E-Switch 300DP1J1BLKM7QEIO does not list approval agency certification in available data. Applications requiring specific agency approvals should verify compliance requirements independently.