Rocker Switch DPDT 7201J1AV2SE2

Part Overview

The 7201J1AV2SE2 is a double-pole double-throw (DPDT) rocker switch manufactured by C&K, rated for 5A at 120V AC and 28V DC. This through-hole mounted switch features a concave black actuator with epoxy sealed PC pin terminals, designed for panel-mount applications requiring reliable on-on switching functionality. The part is currently active in production with 748 units in stock. Alternative equivalent parts may be required due to supply constraints, design revisions, or specific packaging preferences in manufacturing workflows.

Substiute Parts

7201J1AV2SE2

C&KIn Stock: 8567201J1AV2SE2 Datasheet

Current PartRFQ

300DP1J1BLKM7QEIO

E-SwitchIn Stock: 1374300DP1J1BLKM7QEIO Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent substitution for the 7201J1AV2SE2 is based on matching the following critical electrical and mechanical parameters:

• Circuit configuration: DPDT
• Switch function: On-On
• Current rating: 5A (AC/DC)
• Voltage ratings: 120V AC / 28V DC
• Mounting type: Through hole, right angle, vertical orientation
• Actuator type: Concave (Standard V)
• Actuator color: Black
• Termination style: PC Pin
• Operating temperature range: -30°C to 85°C
• RoHS3 compliance

The substitute part 300DP1J1BLKM7QEIO from E-Switch meets all these core electrical and mechanical requirements, enabling direct functional replacement in applications where the 7201J1AV2SE2 is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the 7201J1AV2SE2 and 300DP1J1BLKM7QEIO are active production parts with ROHS3 compliance. The primary distinction is electrical life rating: the C&K part specifies 100,000 cycles while the E-Switch substitute provides 40,000 cycles. Selection between these parts should be based on application duty cycle requirements. For applications requiring extended operational life or frequent switching cycles, the 7201J1AV2SE2 is the preferred choice. The 300DP1J1BLKM7QEIO is suitable for applications with moderate switching frequency where the lower cycle rating is acceptable. Both parts carry equivalent electrical and mechanical specifications for voltage, current, temperature, and mounting requirements.

Frequently Asked Questions (FAQ)

Q: Can the 300DP1J1BLKM7QEIO directly replace the 7201J1AV2SE2 in existing designs?

A: Yes, provided the application duty cycle does not exceed 40,000 switching cycles. Both parts share identical electrical ratings (5A at 120V AC / 28V DC), circuit configuration (DPDT), mounting geometry (through hole, right angle, vertical), and termination style (PC pin). Physical dimensions and panel cutout compatibility should be verified for the specific application.

Q: What is the difference in packaging between these parts?

A: The 7201J1AV2SE2 is supplied in tray packaging, while the 300DP1J1BLKM7QEIO is supplied in bulk packaging. Packaging selection may affect handling, storage, and assembly processes but does not impact electrical or mechanical performance.

Q: Are both parts compliant with environmental regulations?

A: Both parts are ROHS3 compliant. The 7201J1AV2SE2 is REACH Affected, while the 300DP1J1BLKM7QEIO is REACH Unaffected. Regulatory compliance requirements for the end application should be evaluated when selecting between these parts.

Q: What is the primary limitation of the E-Switch substitute?

A: The 300DP1J1BLKM7QEIO has an electrical life rating of 40,000 cycles compared to 100,000 cycles for the C&K part. Applications requiring higher switching cycle counts should use the 7201J1AV2SE2 to ensure adequate component longevity.

Q: Are approval certifications identical between both parts?

A: The 7201J1AV2SE2 carries cULus approval certification. The 300DP1J1BLKM7QEIO does not list an approval agency. Applications requiring specific third-party certifications should use the C&K part.