C&K 7201J1AV2ME2 Rocker Switch DPDT 5A 120V - Equivalent & Substitute Parts

Part Overview

The C&K 7201J1AV2ME2 is a through-hole rocker switch with DPDT (Double Pole Double Throw) configuration rated for 5A at 120V AC. This component features a concave black actuator, epoxy sealed terminals, and is designed for right-angle vertical mounting applications. The part is currently obsolete, making equivalent substitutes necessary for ongoing production and maintenance requirements. Substitute parts must maintain electrical compatibility across voltage and current ratings while accommodating packaging and compliance requirements.

Substiute Parts

7201J1AV2ME2

C&KIn Stock: 11567201J1AV2ME2 Datasheet

Current PartRFQ

7201J1AV2SE2

C&KIn Stock: 8567201J1AV2SE2 Datasheet

DirectRFQ

300DP1J1BLKM7QEIO

E-SwitchIn Stock: 1374300DP1J1BLKM7QEIO Datasheet

SimilarRFQ

300DP1J1BLKM7RE

E-SwitchIn Stock: 811300DP1J1BLKM7RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following critical parameters:

• Circuit Configuration: Must be DPDT
• Switch Function: Must be On-On
• Current Rating: Must support minimum 5A (AC/DC)
• Voltage Rating - AC: Must support minimum 120V
• Voltage Rating - DC: Must support minimum 28V
• Mounting Type: Must be Through Hole, Right Angle, Vertical
• Actuator Type: Must be Concave (Standard V)
• Actuator Color: Must be Black
• Termination Style: Must be PC Pin
• Operating Temperature: Must cover -30°C to 85°C range

Parts are grouped into two categories: direct manufacturer substitutes (same manufacturer, same electrical specifications) and cross-manufacturer alternatives (different manufacturer, equivalent electrical specifications).

Parameter Comparison

Engineering Selection Recommendations

7201J1AV2SE2 (C&K - Direct Substitute)

This part is the primary substitute for the obsolete 7201J1AV2ME2. It maintains identical electrical specifications (5A at 120V AC, 28V DC) and mechanical configuration. The part is currently in active production status with 748 units in stock. It achieves ROHS3 compliance and REACH affected status, meeting modern regulatory requirements. Packaging is supplied in trays rather than bulk. Electrical life rating matches the original at 100,000 cycles. This substitute is recommended for applications requiring direct compatibility with the original specification.

300DP1J1BLKM7QEIO (E-Switch - Cross-Manufacturer Substitute)

This E-Switch alternative maintains full electrical compatibility with identical 5A at 120V AC and 28V DC ratings. It shares the same DPDT On-On configuration, mounting type, and actuator specifications. The part is active in production with 1,341 units available. ROHS3 compliance is achieved. The electrical life rating is reduced to 40,000 cycles compared to the original 100,000 cycles. This substitute is suitable for applications where cross-manufacturer sourcing is acceptable and the reduced cycle life does not impact application requirements.

300DP1J1BLKM7RE (E-Switch - Not Recommended)

This E-Switch part does not meet the electrical requirements of the original specification. Current rating is 0.4VA and voltage ratings are 20V AC/DC, both significantly below the required 5A at 120V AC. This part is not electrically compatible and should not be used as a substitute for the 7201J1AV2ME2.

Frequently Asked Questions (FAQ)

Q: Can I use 7201J1AV2SE2 as a direct replacement for 7201J1AV2ME2?

A: Yes. The 7201J1AV2SE2 maintains identical electrical specifications (5A at 120V AC, 28V DC), circuit configuration (DPDT On-On), mounting type (through hole right angle vertical), and actuator specifications (concave black). The primary difference is packaging format (tray versus bulk) and improved RoHS3 compliance status. Electrical life rating is equivalent at 100,000 cycles.

Q: What is the difference between the C&K and E-Switch alternatives?

A: The C&K 7201J1AV2SE2 is a direct manufacturer substitute with identical electrical specifications and cycle life. The E-Switch 300DP1J1BLKM7QEIO maintains equivalent electrical ratings but has reduced electrical life (40,000 cycles versus 100,000 cycles). Both are ROHS3 compliant and active in production.

Q: Why is 300DP1J1BLKM7RE listed but not recommended?

A: The 300DP1J1BLKM7RE has significantly lower electrical ratings (0.4VA at 20V AC/DC) compared to the required 5A at 120V AC. It does not meet the minimum electrical requirements and is not electrically compatible.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (bulk, tray) does not affect electrical performance or mechanical compatibility. Selection between packaging formats depends on procurement and inventory management requirements.

Q: What compliance certifications should I verify for my application?

A: The 7201J1AV2SE2 achieves ROHS3 compliance and REACH affected status. The original 7201J1AV2ME2 is RoHS non-compliant. Verify that your application requirements align with the compliance status of the selected substitute part.

Q: Are there mechanical life specifications provided for these parts?

A: Mechanical life specifications are not provided in the technical data for any of these parts. Electrical life ratings are specified: 100,000 cycles for C&K parts and 40,000 cycles for E-Switch parts.