C&K 7201J1AME2 Rocker Switch DPDT 5A 120V Equivalent & Substitute Parts

Part Overview

The C&K 7201J1AME2 is a through-hole rocker switch with DPDT (Double Pole Double Throw) configuration rated for 5A at 120V AC. This part operates in On-On switch function with a concave black actuator and epoxy sealed PC pin terminals. The 7201J1AME2 is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Substiute Parts

7201J1AME2

C&KIn Stock: 8157201J1AME2 Datasheet

Current PartRFQ

7201J1ASE2

C&KIn Stock: 8027201J1ASE2 Datasheet

DirectRFQ

300DP1J1BLKM6QE

E-SwitchIn Stock: 891300DP1J1BLKM6QE Datasheet

SimilarRFQ

300DP1J1BLKM6RE

E-SwitchIn Stock: 794300DP1J1BLKM6RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 7201J1AME2 are identified based on electrical and mechanical compatibility within the following critical parameters:

Mandatory Matching Parameters:

• Circuit Configuration: DPDT
• Switch Function: On-On
• Mounting Type: Through Hole, Right Angle
• Actuator Type: Concave (Standard V)
• Actuator Color: Black
• Termination Style: PC Pin
• Operating Temperature Range: -30°C to 85°C
• Approval Agency: cULus

Electrical Compatibility Parameters:

• Current Rating: 5A (AC/DC)
• Voltage Rating - AC: 120V
• Voltage Rating - DC: 28V
• Electrical Life: 100,000 Cycles

Substitutes are grouped into two categories: direct manufacturer equivalents from C&K and cross-manufacturer alternatives from E-Switch that meet all electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

C&K 7201J1ASE2 (Direct Equivalent - Recommended Primary Substitute)

The 7201J1ASE2 is the preferred substitute for the obsolete 7201J1AME2. Both parts share identical electrical ratings (5A at 120V AC, 28V DC), circuit configuration (DPDT On-On), mounting type (through-hole right angle), and operating temperature range (-30°C to 85°C). The 7201J1ASE2 maintains the same 100,000-cycle electrical life specification. The primary difference is product status: the 7201J1ASE2 is active and currently in production. Additionally, the 7201J1ASE2 is RoHS Compliant and REACH Affected, providing improved environmental compliance compared to the non-compliant 7201J1AME2. Both parts carry cULus approval.

E-Switch 300DP1J1BLKM6QE (Cross-Manufacturer Equivalent)

The 300DP1J1BLKM6QE from E-Switch provides full electrical and mechanical compatibility with the 7201J1AME2 across all critical parameters: DPDT On-On configuration, 5A at 120V AC rating, through-hole right-angle mounting, and -30°C to 85°C operating temperature. This part is active and ROHS3 Compliant. The electrical life specification is 40,000 cycles, which is lower than the 100,000-cycle rating of the original part. The 300DP1J1BLKM6QE does not list cULus approval. This part is suitable for applications where the reduced cycle life is acceptable and regulatory approval requirements do not mandate cULus certification.

E-Switch 300DP1J1BLKM6RE (Not Recommended)

The 300DP1J1BLKM6RE does not meet the electrical specifications of the 7201J1AME2. This part is rated for 0.4VA at 20V AC/DC, which is significantly lower than the required 5A at 120V AC specification. This part is not suitable as a substitute for the 7201J1AME2.

Frequently Asked Questions (FAQ)

Q: Why is the 7201J1AME2 listed as obsolete?

A: The 7201J1AME2 has been discontinued by C&K. The active equivalent 7201J1ASE2 is available as a direct replacement with identical electrical and mechanical specifications.

Q: Can I use the E-Switch 300DP1J1BLKM6QE as a direct replacement?

A: The 300DP1J1BLKM6QE is electrically and mechanically compatible with the 7201J1AME2 for DPDT On-On switching at 5A 120V AC. However, it has a reduced electrical life rating of 40,000 cycles compared to 100,000 cycles for the original part. Additionally, it does not carry cULus approval. Verify that your application requirements do not mandate the higher cycle life or specific regulatory certification before substitution.

Q: What is the difference between the 7201J1ASE2 and 7201J1AME2?

A: Both parts are electrically and mechanically identical DPDT rocker switches rated for 5A at 120V AC with 100,000-cycle electrical life. The primary differences are: (1) the 7201J1ASE2 is active while the 7201J1AME2 is obsolete, (2) the 7201J1ASE2 is RoHS Compliant while the 7201J1AME2 is non-compliant, and (3) the 7201J1ASE2 is REACH Affected while the 7201J1AME2 is REACH Unaffected.

Q: Why is the 300DP1J1BLKM6RE not recommended?

A: The 300DP1J1BLKM6RE has significantly different electrical ratings (0.4VA at 20V AC/DC) compared to the 7201J1AME2 (5A at 120V AC). This part cannot safely handle the electrical load of the original specification and is not a suitable substitute.

Q: What packaging is available for substitute parts?

A: The C&K 7201J1ASE2 is available in standard packaging. The E-Switch 300DP1J1BLKM6QE is supplied in bulk packaging. Confirm packaging requirements with your procurement process before ordering.

Q: Are all substitute parts cULus approved?

A: The C&K 7201J1ASE2 carries cULus approval, matching the original part. The E-Switch 300DP1J1BLKM6QE does not list cULus approval. If cULus certification is required for your application, use the 7201J1ASE2.