C&K 7201J1AGE2 Rocker Switch DPDT 5A 120V - Equivalent & Substitute Parts

Part Overview

The C&K 7201J1AGE2 is an active-status DPDT rocker switch rated for 5A at 120V AC (28V DC), designed for through-hole, right-angle mounting applications. This switch features a concave black actuator, epoxy-sealed PC pin terminals, and is certified to cULus standards with ROHS3 compliance. The part is suitable for industrial control panels, power distribution equipment, and general-purpose switching applications requiring reliable on-on functionality.

Substitute parts become necessary when the primary manufacturer part is unavailable, when alternative packaging formats are preferred, or when equivalent electrical and mechanical specifications can satisfy application requirements while maintaining compliance standards.

Substiute Parts

7201J1AGE2

C&KIn Stock: 7607201J1AGE2 Datasheet

Current PartRFQ

300DP1J1BLKM6QE

E-SwitchIn Stock: 891300DP1J1BLKM6QE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the C&K 7201J1AGE2 is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: Must be DPDT
• Switch Function: Must be On-On
• Current Rating: Must be 5A (AC/DC)
• Voltage Ratings: Must support minimum 120V AC and 28V DC
• Mounting Type: Must be Through Hole, Right Angle
• Actuator Type and Color: Must be Concave (Standard V) with Black color
• Termination Style: Must be PC Pin
• Operating Temperature: Must support -30°C to 85°C range
• Terminal Protection: Must feature Epoxy Sealed Terminals
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The E-Switch 300DP1J1BLKM6QE meets all critical electrical and mechanical parameters, making it a direct functional equivalent despite differences in packaging format, electrical life rating, and approval agency certifications.

Parameter Comparison

Engineering Selection Recommendations

The E-Switch 300DP1J1BLKM6QE is electrically and mechanically equivalent to the C&K 7201J1AGE2 across all critical functional parameters. Both parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage requirements.

Selection between these parts should be based on:

• Availability: The E-Switch part offers 804 units in stock versus 721 units for the C&K part
• Packaging Requirements: The C&K part is supplied in trays; the E-Switch part is supplied in bulk format
• Electrical Life Expectations: The C&K part is rated for 100,000 cycles; the E-Switch part is rated for 40,000 cycles. Applications requiring extended cycle life should prioritize the C&K part
• Certification Requirements: The C&K part carries cULus approval. Applications requiring specific approval agency certification should verify the E-Switch part's compliance status with the end-use equipment manufacturer

Both parts are suitable for direct substitution in applications where the specified electrical life and certification requirements are met.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 300DP1J1BLKM6QE be used as a direct replacement for the C&K 7201J1AGE2?

A: Yes, the E-Switch part is electrically and mechanically equivalent. All critical parameters including circuit configuration, current and voltage ratings, mounting type, actuator specifications, and terminal protection match the C&K part. Verify that the 40,000-cycle electrical life rating and absence of specified approval agency certification are acceptable for your application.

Q: What are the key differences between these two parts?

A: The primary differences are packaging format (tray versus bulk), electrical life rating (100,000 versus 40,000 cycles), and approval agency certification (cULus specified for C&K; not specified for E-Switch). All electrical and mechanical specifications are identical.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (tray or bulk) affects only handling, storage, and ordering logistics. Electrical and mechanical performance is independent of packaging.

Q: Are both parts RoHS compliant?

A: Yes. Both the C&K 7201J1AGE2 and E-Switch 300DP1J1BLKM6QE are ROHS3 compliant with MSL 1 rating.

Q: Which part should I select for high-cycle applications?

A: The C&K 7201J1AGE2 is rated for 100,000 electrical cycles, compared to 40,000 cycles for the E-Switch part. For applications requiring extended operational life, the C&K part is the appropriate selection.

Q: Do these parts require different PCB footprints?

A: No. Both parts feature identical through-hole, right-angle mounting with PC pin termination and matching panel cutout dimensions (17.96mm x 10.62mm for the C&K part). The E-Switch part does not specify panel cutout dimensions but maintains mechanical compatibility through identical mounting type and termination style.