Equivalent & Substitute Parts for 7200L12TP

Part Overview

The 7200L12TP is an asynchronous FIFO (First-In-First-Out) memory IC manufactured by Renesas Electronics Corporation. This 256 x 9-bit uni-directional FIFO operates at 50MHz with a 12ns access time and is housed in a 28-pin DIP package. The device is classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations where legacy compatibility is required.

Substiute Parts

7200L12TP

Renesas Electronics CorporationIn Stock: 8527200L12TP Datasheet

Current PartRFQ

7200L12TPG

Renesas Electronics CorporationIn Stock: 11037200L12TPG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 7200L12TP is determined by strict equivalence across the following critical parameters:

• Memory capacity: 2.25K (256 x 9) bits
• FIFO function: Asynchronous operation
• Performance: 50MHz data rate, 12ns access time
• Electrical: 4.5 V ~ 5.5 V supply voltage, 80mA maximum supply current
• Interface: Uni-directional bus architecture
• Package: 28-pin DIP form factor with 0.300" (7.62mm) pitch
• Temperature range: 0°C ~ 70°C

The 7200L12TPG is a direct functional equivalent that maintains all electrical and mechanical specifications while differing only in packaging format (tube vs. standard) and product status (active vs. obsolete).

Parameter Comparison

Engineering Selection Recommendations

The 7200L12TPG is the direct substitute for the 7200L12TP. Both devices are manufactured by Renesas Electronics Corporation and provide identical electrical and mechanical performance. The primary distinction is product status: the 7200L12TP is obsolete while the 7200L12TPG remains in active production.

For new designs and ongoing system support, the 7200L12TPG is the appropriate selection. This part maintains full functional compatibility while offering the advantage of active manufacturer support and ROHS3 compliance, compared to the non-compliant status of the original 7200L12TP.

Both parts carry REACH Unaffected status and EAR99 export classification. The tube packaging of the 7200L12TPG may require adjustment to assembly processes designed for standard packaging, but electrical and mechanical compatibility is complete.

Frequently Asked Questions (FAQ)

Q: Can the 7200L12TPG be used as a direct replacement for the 7200L12TP?

A: Yes. The 7200L12TPG is electrically and mechanically identical to the 7200L12TP. All functional parameters, pin configurations, and performance specifications are equivalent. The devices differ only in product status and packaging format.

Q: What is the difference between the 7200L12TP and 7200L12TPG?

A: The 7200L12TP is classified as obsolete, while the 7200L12TPG is in active production. The 7200L12TPG also carries ROHS3 compliance, whereas the 7200L12TP is RoHS non-compliant. Packaging differs: standard vs. tube format. All electrical and mechanical specifications are identical.

Q: Are there any pin configuration differences between these parts?

A: No. Both the 7200L12TP and 7200L12TPG use the same 28-pin DIP package with 0.300" (7.62mm) pitch. Pin assignments and functionality are identical.

Q: What is the memory capacity of these FIFO devices?

A: Both devices provide 2.25K bits of storage organized as 256 words x 9 bits per word in an asynchronous FIFO configuration.

Q: What supply voltage range is required?

A: Both devices operate with a supply voltage range of 4.5 V to 5.5 V, with maximum supply current of 80mA.

Q: What is the maximum operating frequency?

A: Both devices support a 50MHz data rate with a 12ns access time.

Q: Are these devices suitable for new designs?

A: The 7200L12TP is obsolete and not recommended for new designs. The 7200L12TPG, being in active production with ROHS3 compliance, is the appropriate choice for new implementations.