Equivalent & Substitute Parts for 719A-00/48

Part Overview

The Qualtek 719A-00/48 is an AC power entry connector receptacle module designed for IEC 320-C14 panel mount applications. This component features male blades, a twin fused holder, and quick connect termination rated for commercial use. The product is currently obsolete, making identification of compatible substitute parts essential for ongoing maintenance, repair, and new design implementations where equivalent functionality is required.

Substiute Parts

719A-00/48

QualtekIn Stock: 762719A-00/48 Datasheet

Current PartRFQ

6200.2200

SCHURTER Inc.In Stock: 64706200.2200 Datasheet

MFR RecommendedRFQ

6220.2200

SCHURTER Inc.In Stock: 7446220.2200 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 719A-00/48 are qualified based on the following critical parameters that determine functional equivalence:

• Connector Style: IEC 320-C14 (industry standard interface)
• Connector Type: Receptacle, Male Blades - Module
• Number of Positions: 3
• Mounting Type: Panel Mount, Flange
• Termination Method: Quick Connect - 0.189" (4.8mm)
• Fuse Accommodation: Yes
• Filter Type: Unfiltered - Commercial
• Material Flammability Rating: UL94 V-0
• Regulatory Compliance: CSA and UL approval

The substitute parts identified (SCHURTER 6200.2200 and 6220.2200) maintain these core parameters while offering active product status and expanded approval certifications. Panel cutout dimensions show minor variations within acceptable tolerance ranges for panel mount applications.

Parameter Comparison

Engineering Selection Recommendations

Both SCHURTER substitute parts (6200.2200 and 6220.2200) are qualified replacements for the obsolete Qualtek 719A-00/48 based on matching core electrical and mechanical specifications. Key selection factors include:

Product Status: The substitute parts maintain active product status, ensuring continued availability and manufacturing support compared to the obsolete original part.

Regulatory Compliance: Both substitutes carry expanded approval certifications (CCC, CSA, ENEC, UL) compared to the original part (CSA, UL), providing broader market acceptance and compliance coverage.

Panel Cutout Dimensions: Minor dimensional variations exist between the original and substitutes. The original requires a 27.30mm x 31.12mm rectangular cutout, while substitutes require 27.50mm x 31.50mm (6200.2200) or 27.60mm x 31.50mm (6220.2200). These differences are within typical panel fabrication tolerances and do not prevent direct substitution in existing panel designs.

Ingress Protection: Substitute parts provide IP40 rating, an enhancement not specified for the original part, offering improved environmental protection in commercial applications.

Electrical Ratings: Substitute parts specify 10A at 250VAC, providing defined electrical parameters for the IEC 320-C14 interface where the original part did not specify these values.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 6200.2200 or 6220.2200 directly replace the Qualtek 719A-00/48 in existing installations?

A: Yes. Both parts maintain identical connector style (IEC 320-C14), connector type (Receptacle, Male Blades - Module), number of positions (3), mounting type (Panel Mount, Flange), and termination method (Quick Connect - 0.189"). The minor panel cutout dimension variations are within standard fabrication tolerances for panel mount applications.

Q: What is the difference between SCHURTER 6200.2200 and 6220.2200?

A: Both parts are functionally equivalent with identical electrical specifications (10A, 250VAC), connector configuration, and regulatory approvals. The primary difference is panel cutout dimensions: 6200.2200 requires 27.50mm x 31.50mm, while 6220.2200 requires 27.60mm x 31.50mm. Selection depends on existing panel hole specifications.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both SCHURTER parts are ROHS3 Compliant, matching the compliance status of the original Qualtek part.

Q: What regulatory approvals do the substitute parts carry?

A: SCHURTER 6200.2200 and 6220.2200 carry CCC, CSA, ENEC, and UL approvals, providing broader regulatory coverage than the original part (CSA, UL).

Q: Do the substitute parts accommodate fuses?

A: Yes. Both substitute parts accommodate fuses with a Fuse Holder configuration. The original part specified a Twin Fused holder; substitute parts use a standard Fuse Holder. Fuses are not included with any of these parts.

Q: What is the ingress protection rating of the substitute parts?

A: Both SCHURTER substitutes provide IP40 ingress protection, which was not specified for the original Qualtek part. This rating indicates protection against solid objects larger than 1mm and water spray from any direction.