Amphenol ICC 71979-214 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 71979-214 is a shrouded rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This 14-position header operates at 0.100" (2.54mm) pitch with a 2-row configuration and features kinked pin solder termination with push-pull fastening. The part is classified as obsolete, making identification of active equivalent components essential for ongoing production and maintenance applications.

Substiute Parts

71979-214

Amphenol ICC (FCI)In Stock: 92071979-214 Datasheet

Current PartRFQ

71979-214LF

Amphenol ICC (FCI)In Stock: 89471979-214LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 71979-214LF serves as a direct substitute for the 71979-214 based on identical electrical and mechanical parameters. Substitution compatibility is determined by the following critical parameters:

• Connector type, contact type, and pin configuration (14-position, 2-row header)
• Pitch specifications (0.100" mating pitch and row spacing)
• Mounting orientation (through-hole, right-angle)
• Shrouding design (shrouded 4-wall configuration)
• Termination method (kinked pin, solder)
• Contact material and mating finish (phosphor bronze with gold GXT™)
• Insulation material and flammability rating (thermoplastic, glass-filled, UL94 V-0)

The 71979-214LF maintains all these parameters identically to the main part, with differences limited to product status, packaging format, and post-contact finish specifications.

Parameter Comparison

Engineering Selection Recommendations

The 71979-214LF is the direct active equivalent for the obsolete 71979-214. Selection between these parts should be based on regulatory and compliance requirements:

The 71979-214LF is recommended for new designs and ongoing production due to its active product status and RoHS compliance. This part meets current environmental regulations and maintains full electrical and mechanical compatibility with the original 71979-214 specification.

The 71979-214 remains available in existing inventory (868 pieces) but carries obsolete status and RoHS non-compliant classification. This part is suitable only for legacy system maintenance where regulatory compliance is not a requirement.

Both parts share identical connector geometry, electrical characteristics, and mechanical interfaces, ensuring direct interchangeability in board-level applications.

Frequently Asked Questions (FAQ)

Q: Are the 71979-214 and 71979-214LF electrically and mechanically interchangeable?

A: Yes. Both parts maintain identical specifications for connector type, pin configuration, pitch, mounting orientation, shrouding, termination method, contact material, and mating finish. They are direct substitutes at the functional level.

Q: What is the primary difference between these two parts?

A: The 71979-214LF is the active production equivalent with RoHS compliance and REACH applicability, while the 71979-214 is classified as obsolete and RoHS non-compliant. The 71979-214LF is also supplied in tube packaging versus bulk packaging for the original part.

Q: Can I use the 71979-214LF as a replacement in existing assemblies designed for the 71979-214?

A: Yes. The 71979-214LF provides full compatibility for board-level integration, PCB footprint, and mating interface requirements. No design modifications are necessary.

Q: Does packaging format affect compatibility?

A: No. Packaging format (tube versus bulk) does not affect electrical or mechanical performance. It impacts only handling, storage, and supply chain logistics.

Q: Are there compliance considerations when selecting between these parts?

A: Yes. The 71979-214LF meets RoHS and REACH requirements, making it suitable for applications subject to environmental regulations. The 71979-214 does not meet these standards and should be reserved for legacy systems where such compliance is not mandated.