Qualtek Electronics 719-00/63 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The Qualtek Electronics 719-00/63 is an IEC 320-C14 power entry connector receptacle module designed for panel-mount applications in AC power distribution systems. This component features male blades, a fuse holder drawer, and quick-connect termination suitable for commercial-grade power inlet applications.

The 719-00/63 is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system compatibility and ensure continued availability for replacement, repair, and new installations where this connector specification is required.

Substiute Parts

719-00/63

Qualtek Electronics Corp.In Stock: 919719-00/63 Datasheet

Current PartRFQ

719W-00/04

QualtekIn Stock: 15841719W-00/04 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 719-00/63 is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: IEC 320-C14 receptacle with male blades and module configuration
• Mounting Configuration: Panel mount with flange design
• Electrical Interface: Quick-connect termination at 0.250" (6.3mm)
• Mechanical Fit: Panel cutout dimensions must accommodate the connector footprint
• Fuse Integration: Fuse holder drawer capability
• Regulatory Compliance: CSA and UL approval certifications
• Environmental Classification: Unfiltered commercial-grade filter type
• Material Standards: UL94 V-0 flammability rating and ROHS3 compliance

The substitute part 719W-00/04 maintains functional and mechanical equivalence across all these parameters while offering active product status and enhanced availability.

Parameter Comparison

Engineering Selection Recommendations

The 719W-00/04 serves as the direct substitute for the obsolete 719-00/63. Both connectors maintain identical IEC 320-C14 specifications, panel-mount flange configuration, and quick-connect termination geometry. The substitute part carries active product status with significantly higher inventory availability (15,829 units versus 903 units).

Regulatory compliance is maintained through CSA and UL certifications on both parts. The 719W-00/04 adds TUV certification, providing expanded approval coverage. Both parts meet ROHS3 compliance and REACH unaffected status.

The panel cutout dimension variance (31.12mm versus 31.40mm on the Y-axis) represents a 0.28mm difference within typical manufacturing tolerances for panel-mount connectors. This minor dimensional variation does not affect functional compatibility or panel installation feasibility.

The 719W-00/04 specifies electrical ratings of 10A at 250VAC, which define the operational envelope for this connector class. The twin-fused fuse holder configuration on the substitute provides dual-fuse protection capability compared to the single fuse holder on the main part.

Frequently Asked Questions (FAQ)

Q: Can the 719W-00/04 be used as a direct replacement for the 719-00/63 in existing panel installations?

A: Yes. Both connectors share identical IEC 320-C14 specifications, panel-mount flange design, and quick-connect termination. The panel cutout dimension difference of 0.28mm falls within standard manufacturing tolerances and does not prevent installation in existing panel cutouts designed for the 719-00/63.

Q: What is the significance of the "twin fused" fuse holder on the 719W-00/04?

A: The twin-fused configuration indicates dual-fuse protection capability. This represents an enhancement over the single fuse holder on the 719-00/63 and provides additional circuit protection options for power distribution applications.

Q: Are there any compliance or certification differences between these parts?

A: Both parts maintain CSA and UL certifications. The 719W-00/04 adds TUV certification. Both parts are ROHS3 compliant and REACH unaffected. No compliance gaps exist between the two parts.

Q: Why is the 719-00/63 classified as obsolete?

A: Obsolete status indicates the part is no longer in active production. The 719W-00/63 represents the active equivalent, ensuring continued availability and support for this connector specification.

Q: What are the electrical operating parameters for these connectors?

A: The 719W-00/04 specifies 10A at 250VAC. These ratings define the maximum safe operating envelope for power distribution applications using this IEC 320-C14 connector class.

Q: Are packaging differences significant for procurement?

A: The 719-00/63 is packaged in unspecified format with 903 units in stock. The 719W-00/04 is supplied in bulk packaging with 15,829 units available. Bulk packaging typically offers cost advantages and ensures consistent supply for production environments.