Qualtek 716-30/28 AC Power Connector: Equivalent & Substitute Parts

Part Overview

The Qualtek 716-30/28 is an IEC 320-2-2/F power entry connector receptacle designed for panel-mount applications with snap-in installation. This component features female sockets for AC power inlet connections in commercial equipment. The part is currently obsolete, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility with existing designs.

Substiute Parts

716-30/28

QualtekIn Stock: 791716-30/28 Datasheet

Current PartRFQ

716W-X2/02

QualtekIn Stock: 12382716W-X2/02 Datasheet

MFR RecommendedRFQ

EAC405040

Switchcraft Inc.In Stock: 923EAC405040 Datasheet

MFR RecommendedRFQ

EAC405060

Switchcraft Inc.In Stock: 912EAC405060 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Qualtek 716-30/28 is determined by the following critical parameters:

• Connector Style & Type: All substitutes must maintain IEC 320-2-2/F configuration with female socket receptacles
• Mounting Configuration: Panel mount, snap-in installation required
• Termination Method: Quick connect termination compatibility
• Position Count: 3-position configuration
• Filter Classification: Unfiltered commercial-grade specification
• Panel Cutout Compatibility: Rectangular opening dimensions must accommodate the connector footprint
• Regulatory Compliance: RoHS3 compliance and relevant approval agencies (CSA, UL, or equivalent)

The substitute parts identified below satisfy these core substitution criteria while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: Qualtek 716W-X2/02

The 716W-X2/02 is the manufacturer-recommended direct substitute. As an active Qualtek product within the same 716 series family, it maintains full electrical and mechanical compatibility with the obsolete 716-30/28. This part carries expanded regulatory approvals (CSA, TUV, UL) and benefits from current production status with substantial inventory availability (12,359 units in stock). The termination pin size difference (0.189" vs. 0.110") requires verification against existing wiring harness specifications.

Secondary Options: Switchcraft EAC405040 and EAC405060

Both Switchcraft EAC models provide functionally equivalent IEC 320-2-2/F receptacles with active product status and ROHS3 compliance. These parts differ primarily in panel thickness accommodation ranges:

• EAC405040: 0.031" to 0.059" (0.79mm to 1.50mm) panel thickness
• EAC405060: 0.056" to 0.070" (1.42mm to 1.78mm) panel thickness

Selection between these variants depends on the specific panel thickness of the target application. Both employ 0.187" (4.7mm) quick-connect termination pins, requiring harness compatibility assessment.

Frequently Asked Questions (FAQ)

Q: Can the 716W-X2/02 be used as a direct replacement for the 716-30/28?

A: The 716W-X2/02 maintains identical IEC 320-2-2/F connector configuration, 3-position layout, panel-mount snap-in installation, and unfiltered commercial specification. However, the termination pin diameter differs (0.189" vs. 0.110"), requiring verification that existing quick-connect receptacles accommodate the larger pin size.

Q: What is the difference between the Switchcraft EAC405040 and EAC405060?

A: Both parts are electrically and mechanically identical IEC 320-2-2/F receptacles. The distinction lies in panel thickness compatibility: EAC405040 accommodates thinner panels (0.79mm to 1.50mm), while EAC405060 is designed for thicker panels (1.42mm to 1.78mm). Select the variant matching your panel thickness specification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The 716W-X2/02, EAC405040, and EAC405060 are all ROHS3 compliant, meeting current environmental and hazardous substance restrictions.

Q: What regulatory approvals do these substitutes carry?

A: The 716W-X2/02 carries CSA, TUV, and UL approvals. The Switchcraft EAC models do not list specific approval agencies in the provided specifications. Verify approval requirements against your application standards before final selection.

Q: Does panel cutout size variation affect compatibility?

A: The 716-30/28 specifies a 32.26mm x 24.77mm rectangular cutout. The 716W-X2/02 requires 32.60mm x 25.30mm, while both Switchcraft models require 32.26mm x 24.76mm. Existing panel cutouts designed for the original part may require modification to accommodate the 716W-X2/02. The Switchcraft options present minimal dimensional variance and may fit existing openings with tighter tolerances.