Qualtek 716-30/09 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The Qualtek 716-30/09 is a power entry connector receptacle featuring IEC 320-2-2/F female sockets for panel mount applications. This component is designed for AC power distribution in commercial equipment with a 3-position configuration and snap-in mounting. The 716-30/09 is currently classified as obsolete, making identification of active equivalent parts essential for ongoing procurement and system maintenance.

Substiute Parts

716-30/09

QualtekIn Stock: 1123716-30/09 Datasheet

Current PartRFQ

716W-X2/01

QualtekIn Stock: 1581716W-X2/01 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 716-30/09 is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: IEC 320-2-2/F receptacle configuration must remain identical
• Position Count: 3-position configuration is mandatory
• Mounting Configuration: Panel mount with snap-in mechanism required
• Termination Method: Solder termination compatibility
• Filter Classification: Unfiltered commercial-grade specification
• Regulatory Compliance: CSA and UL approvals required as minimum

The substitute part 716W-X2/01 maintains full equivalence across all these parameters while offering enhanced specifications including defined current and voltage ratings, expanded panel thickness tolerance, and additional TUV certification.

Parameter Comparison

Engineering Selection Recommendations

The 716W-X2/01 serves as the direct active equivalent for the obsolete 716-30/09. Both components maintain identical IEC 320-2-2/F connector architecture, 3-position configuration, and panel mount snap-in design. The substitute part is manufactured by the same supplier and carries equivalent regulatory certifications (CSA, UL) with the addition of TUV approval.

The 716W-X2/01 provides defined electrical specifications (10A at 250VAC) that were not explicitly stated for the original part. Panel cutout dimensions show minor variation (32.60mm x 25.30mm versus 32.26mm x 24.77mm), which falls within standard manufacturing tolerance ranges for this connector class. The substitute accommodates a broader panel thickness range (0.79mm to 1.50mm) compared to the fixed 3.00mm specification of the original part, providing greater installation flexibility.

Both parts maintain ROHS3 compliance and identical ECCN/HTSUS classifications, ensuring regulatory continuity for procurement and supply chain documentation.

Frequently Asked Questions (FAQ)

Q: Can the 716W-X2/01 be used as a direct replacement for the 716-30/09?

A: Yes. Both components share identical IEC 320-2-2/F connector style, 3-position configuration, panel mount snap-in mounting, and unfiltered commercial filter classification. The substitute is the active equivalent manufactured by Qualtek.

Q: What are the differences in panel thickness specifications?

A: The 716-30/09 requires a fixed 3.00mm panel thickness. The 716W-X2/01 accommodates panel thickness from 0.79mm to 1.50mm. If your application uses a 3.00mm panel, verify that the substitute's tolerance range is compatible with your specific installation requirements.

Q: Are the electrical ratings identical?

A: The 716-30/09 does not specify current or voltage ratings in available documentation. The 716W-X2/01 is rated for 10A at 250VAC. Confirm that these ratings meet or exceed your application requirements.

Q: Do both parts carry the same regulatory approvals?

A: Both parts carry CSA and UL approvals. The 716W-X2/01 includes additional TUV certification. Both maintain ROHS3 compliance.

Q: What is the difference in termination between the two parts?

A: The 716-30/09 uses standard solder termination. The 716W-X2/01 uses solder eyelet termination, which provides a defined connection point for wire attachment. Both are solder-based termination methods compatible with standard PCB assembly processes.

Q: Are the panel cutout dimensions compatible?

A: The cutout dimensions differ slightly (32.26mm x 24.77mm versus 32.60mm x 25.30mm). The substitute requires a marginally larger opening. Verify that your panel layout accommodates the larger cutout dimension before implementation.