Equivalent & Substitute Parts for Qualtek 716-15/28

Part Overview

The Qualtek 716-15/28 is a power entry connector receptacle featuring IEC 320-2-2/F female sockets with panel mount, snap-in installation. This component is classified as obsolete, necessitating identification of active equivalent models for ongoing applications. Substitute parts must maintain functional compatibility with the IEC 320-2-2/F connector standard and panel mounting requirements.

Substiute Parts

716-15/28

QualtekIn Stock: 1162716-15/28 Datasheet

Current PartRFQ

716W-X2/02

QualtekIn Stock: 12382716W-X2/02 Datasheet

MFR RecommendedRFQ

EAC405040

Switchcraft Inc.In Stock: 923EAC405040 Datasheet

MFR RecommendedRFQ

EAC405060

Switchcraft Inc.In Stock: 912EAC405060 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 716-15/28 is determined by the following critical parameters:

• Connector Style: IEC 320-2-2/F (mandatory match)
• Connector Type: Receptacle, Female Sockets (mandatory match)
• Number of Positions: 3 (mandatory match)
• Mounting Type: Panel Mount, Snap-In (mandatory match)
• Filter Type: Unfiltered - Commercial (mandatory match)
• Panel Cutout Dimensions: Rectangular - 32.26mm x 24.77mm (allowable tolerance range)
• Panel Thickness Accommodation: Must support 0.059" (1.50mm) minimum
• Termination: Quick Connect style (allowable variation in contact size within IEC 320-2-2/F specification)
• RoHS Status: ROHS3 Compliant (mandatory match)

The identified substitute parts maintain these core parameters while offering active product status and enhanced availability.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain compliance with ROHS3 requirements and preserve the core IEC 320-2-2/F connector specification. Selection between substitutes depends on panel thickness accommodation and termination contact size compatibility with existing wiring harnesses.

The Qualtek 716W-X2/02 provides direct manufacturer continuity with expanded panel thickness range (0.031" to 0.059") and enhanced certification coverage including TUV approval. This part accommodates the original 0.059" panel thickness specification while supporting thinner panel installations.

The Switchcraft EAC405040 and EAC405060 models offer identical connector geometry and electrical ratings. EAC405040 supports panel thickness 0.036" to 0.050", while EAC405060 accommodates 0.056" to 0.070" panel thickness. Selection between these variants depends on specific panel thickness requirements.

All substitute parts feature Quick Connect termination with contact sizes (0.187" to 0.189") larger than the original 0.110" specification, requiring verification of wiring harness compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 716W-X2/02 directly replace the 716-15/28 in existing applications?

A: The 716W-X2/02 maintains IEC 320-2-2/F connector compatibility, identical panel cutout dimensions within tolerance, and supports the original 0.059" panel thickness. The primary consideration is termination contact size: the 716W-X2/02 uses 0.189" (4.8mm) Quick Connect contacts versus the original 0.110" (2.8mm) specification. Wiring harness compatibility must be verified before substitution.

Q: What is the difference between EAC405040 and EAC405060?

A: Both Switchcraft models maintain identical connector specifications and electrical ratings. The distinction is panel thickness accommodation: EAC405040 supports 0.036" to 0.050" thickness, while EAC405060 supports 0.056" to 0.070" thickness. Selection depends on the specific panel thickness of the target application.

Q: Are all substitute parts RoHS compliant?

A: All identified substitutes are ROHS3 compliant, matching the original 716-15/28 specification.

Q: What certifications do the substitute parts carry?

A: The Qualtek 716W-X2/02 carries CSA, TUV, and UL approvals. The Switchcraft EAC405040 and EAC405060 do not specify approval agencies in the provided data.

Q: Does panel cutout dimension variation affect substitution?

A: The 716W-X2/02 panel cutout (32.60mm x 25.30mm) differs slightly from the original (32.26mm x 24.77mm). The Switchcraft models (32.26mm x 24.76mm) match the original dimensions within tolerance. Panel cutout compatibility must be verified for existing panel installations.