Equivalent & Substitute Parts for 710W-00/04

Part Overview

The 710W-00/04 is a power entry connector receptacle designed for IEC 320-2-2/F applications, featuring female sockets with panel mount flange configuration. This component is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this connector style and electrical specifications.

Substiute Parts

710W-00/04

QualtekIn Stock: 730710W-00/04 Datasheet

Current PartRFQ

710W-00/02

QualtekIn Stock: 1425710W-00/02 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 710W-00/04 is determined by strict equivalence across the following critical parameters:

• Connector style and type (IEC 320-2-2/F receptacle, female sockets)
• Electrical ratings (10A at 250VAC)
• Position count (3 positions)
• Mounting configuration (panel mount with flange)
• Panel cutout dimensions (32.50mm x 25.00mm rectangular)
• Filter classification (unfiltered - commercial)
• Regulatory approvals (CSA, TUV, UL)
• Environmental compliance (ROHS3, REACH Unaffected)

The 710W-00/02 meets all these criteria and represents the active equivalent within the 710W series.

Parameter Comparison

Engineering Selection Recommendations

The 710W-00/02 is the direct active equivalent for the obsolete 710W-00/04. Both components share identical electrical specifications, mechanical dimensions, and regulatory certifications. The primary distinction is termination method: the 710W-00/04 uses solder eyelet termination, while the 710W-00/02 employs quick connect terminals (0.189" / 4.8mm). Selection between these variants depends on the application's termination requirements. The 710W-00/02 maintains active product status with established supply availability, making it the appropriate choice for new designs and obsolescence mitigation.

Frequently Asked Questions (FAQ)

Q: Can the 710W-00/02 directly replace the 710W-00/04 in existing applications?

A: Electrical and mechanical compatibility is confirmed across all critical parameters. However, termination method differs: the 710W-00/04 features solder eyelet termination while the 710W-00/02 uses quick connect terminals. Compatibility depends on whether the application's wiring harness or PCB accommodates quick connect terminals.

Q: Are the panel cutout dimensions identical between these parts?

A: Yes. Both components require a rectangular panel cutout of 32.50mm x 25.00mm, ensuring mechanical interchangeability in panel mount applications.

Q: Do both parts carry the same regulatory approvals?

A: Yes. Both the 710W-00/04 and 710W-00/02 are certified by CSA, TUV, and UL, and both comply with ROHS3 and REACH requirements.

Q: What is the significance of the product status difference?

A: The 710W-00/04 is classified as obsolete, indicating discontinued manufacturing. The 710W-00/02 maintains active status with current production and established supply channels, making it the recommended choice for ongoing applications.

Q: Are there differences in electrical performance between these connectors?

A: No. Both components are rated for 10A at 250VAC with identical connector style (IEC 320-2-2/F), position count (3), and filter classification (unfiltered - commercial).