Equivalent & Substitute Parts for 7107P1CWCKE

Part Overview

The 7107P1CWCKE is a toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 0.4VA at 20V AC/DC. It features panel mount installation with a circular 6.35mm diameter cutout and 1/4-40 bushing thread. The switch is sealed to IP67 standards with epoxy-sealed terminals and operates across -30°C to 85°C. This part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production requirements.

Substiute Parts

7107P1CWCKE

C&KIn Stock: 8797107P1CWCKE Datasheet

Current PartRFQ

7107P1CWCPE

C&KIn Stock: 8937107P1CWCPE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 7107P1CWCPE qualifies as a direct substitute for the 7107P1CWCKE based on identical electrical and mechanical parameters. Substitution is determined by the following criteria:

• Identical SPDT circuit configuration
• Matching current rating of 0.4VA (AC/DC)
• Identical voltage rating of 20V AC/DC
• Identical panel mount configuration with 6.35mm circular cutout and 1/4-40 bushing thread
• Matching IP67 ingress protection rating
• Identical operating temperature range of -30°C to 85°C
• Identical termination style (PC Pin)
• Identical electrical life specification of 40,000 cycles
• Same base product number (7107P1) within the C&K 7000 series

Parameter Comparison

Engineering Selection Recommendations

The 7107P1CWCPE is the recommended substitute for the obsolete 7107P1CWCKE. The substitute part maintains active product status with C&K, ensuring ongoing availability and supply chain continuity. Both parts carry equivalent RoHS compliance certifications and identical MSL ratings, supporting deployment in regulated environments. The 7107P1CWCPE is functionally and mechanically interchangeable with the original part across all specified electrical parameters, mounting configurations, and environmental ratings. Selection of the active substitute eliminates obsolescence risk for new production and design revisions.

Frequently Asked Questions (FAQ)

Q: Can the 7107P1CWCPE directly replace the 7107P1CWCKE in existing designs?

A: Yes. Both parts share identical electrical ratings (0.4VA, 20V AC/DC), circuit configuration (SPDT), mechanical mounting (panel mount with 6.35mm cutout and 1/4-40 bushing), termination style (PC Pin), and environmental specifications (IP67, -30°C to 85°C). No circuit modifications or panel redesign are required.

Q: What is the primary difference between these two parts?

A: The 7107P1CWCKE is classified as obsolete, while the 7107P1CWCPE maintains active product status. Both parts are manufactured by C&K within the 7000 series and meet equivalent compliance standards.

Q: Are there any compliance or certification differences?

A: Both parts are RoHS compliant and carry identical MSL ratings of 1 (Unlimited). The 7107P1CWCKE is ROHS3 compliant, while the 7107P1CWCPE is RoHS compliant. Both are classified as EAR99 and share the same HTSUS code (8536.50.9065).

Q: What panel cutout dimensions are required for installation?

A: Both parts require a circular cutout of 6.35mm diameter with a 1/4-40 bushing thread. Panel mounting is identical between the two parts.

Q: Is the actuator design the same between both parts?

A: Yes. Both parts feature a flat anti-rotation actuator with a length of 21.33mm and actuator material of brass with chrome plating.

Q: What is the electrical life specification for these switches?

A: Both the 7107P1CWCKE and 7107P1CWCPE are rated for 40,000 electrical cycles.