Electroswitch 7102C Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The Electroswitch 7102C is a panel-mounted toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 6A at 125V AC. The switch features an On-Off-On function with a standard round actuator and quick connect termination. This component is actively manufactured and RoHS compliant, making it suitable for industrial control and switching applications requiring reliable electrical performance within specified current and voltage parameters.

Substitute parts are identified when equivalent electrical and mechanical characteristics allow direct functional replacement while maintaining circuit integrity and safety margins within the application's design specifications.

Substiute Parts

7102C

ElectroswitchIn Stock: 11147102C Datasheet

Current PartRFQ

7202C

ElectroswitchIn Stock: 9047202C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Electroswitch 7102C is determined by the following critical parameters:

• Circuit Configuration: Must be SPDT to maintain electrical topology
• Switch Function: Must be On-Off-On to preserve operational behavior
• Mounting Type: Must be Panel Mount for mechanical compatibility
• Actuator Type and Length: Must be Standard Round with 14.27mm length for physical fit
• Termination Style: Must be Quick Connect - 0.250" (6.3mm) for connection compatibility
• Bushing Thread: Must be 15/32-32 for panel installation
• Operating Temperature Range: Must encompass -10°C to 65°C minimum
• RoHS Compliance: Must maintain RoHS compliant status for regulatory alignment

The Electroswitch 7202C qualifies as a substitute part because it maintains all mechanical and functional parameters identical to the 7102C. The primary difference is the current rating, which is elevated to 20A AC. This higher current capacity allows the 7202C to function in applications where the 7102C is specified, provided the application's actual current demand does not exceed 6A. The 7202C provides design flexibility for applications requiring potential future current upgrades or where higher-rated components are preferred for margin.

Parameter Comparison

Engineering Selection Recommendations

Both the 7102C and 7202C are actively manufactured and RoHS compliant, ensuring regulatory compliance and supply chain continuity. Selection between these parts should be based on application current requirements:

• Select 7102C when the application current demand is specified at or below 6A AC and component cost optimization is a priority.
• Select 7202C when the application current demand exceeds 6A but does not exceed 20A AC, or when design margin for future current increases is required.

Both parts maintain identical mechanical interfaces, electrical topology, and environmental operating specifications, ensuring direct functional interchangeability within their respective current ratings.

Frequently Asked Questions (FAQ)

Q: Can the 7202C replace the 7102C in an existing design?

A: Yes. The 7202C is mechanically and functionally identical to the 7102C. It will install in the same panel cutout, connect to the same termination points, and perform the same On-Off-On switching function. The 7202C's higher current rating (20A vs. 6A) does not affect compatibility; it only provides additional capacity margin.

Q: What is the primary difference between the 7102C and 7202C?

A: The current rating differs. The 7102C is rated for 6A AC, while the 7202C is rated for 20A AC. All other electrical, mechanical, and environmental specifications are identical.

Q: Are both parts available in the same packaging?

A: Yes. Both the 7102C and 7202C are supplied in bulk packaging and are actively stocked.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are RoHS compliant and carry the same ECCN (EAR99) and HTSUS classifications.

Q: Can the 7102C be used in applications requiring 20A switching capacity?

A: No. The 7102C is rated for 6A maximum. Using it in a 20A application would exceed its electrical rating and create a safety hazard. The 7202C must be used for 20A applications.

Q: Are there any mechanical differences in the actuator or panel mounting between these parts?

A: No. Both parts feature identical standard round actuators (14.27mm length), bushing threads (15/32-32), and quick connect termination (0.250" / 6.3mm). They are mechanically interchangeable.