C&K 7101TPV3GE Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The C&K 7101TPV3GE is an active production toggle switch with SPDT (Single Pole Double Throw) configuration, rated for 5A at 120V AC and 28V DC. This panel-mount component features anti-rotation actuator design with epoxy sealed terminals and is suitable for applications requiring reliable switching in industrial and commercial environments. Alternative models may be required due to inventory constraints, specific mounting requirements, or application-specific electrical ratings.

Substiute Parts

7101TPV3GE

C&KIn Stock: 10997101TPV3GE Datasheet

Current PartRFQ

100SP1T8B13VS2REH

E-SwitchIn Stock: 1735100SP1T8B13VS2REH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for toggle switches is determined by compatibility across critical electrical and mechanical parameters. The primary criteria for the 7101TPV3GE are:

Electrical Compatibility: Circuit configuration (SPDT), switch function (On-On), and voltage/current ratings must support the application requirements.

Mechanical Compatibility: Panel cutout dimensions (11.91mm circular), bushing thread (15/32-32), and termination style (PC Pin) must match the existing installation footprint.

Environmental & Compliance: Operating temperature range (-30°C ~ 85°C), RoHS3 compliance, and MSL rating (1) establish baseline reliability standards.

The E-Switch 100SP1T8B13VS2REH shares identical circuit configuration, switch function, panel cutout dimensions, bushing thread, termination style, operating temperature range, and RoHS3 compliance. However, this substitute operates at reduced electrical ratings (0.4VA at 20V AC/DC) and lower electrical life (40,000 cycles), making it suitable only for applications with lower power requirements than the original specification.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7101TPV3GE remains the primary specification for applications requiring 5A switching capacity at 120V AC or 28V DC with 100,000-cycle electrical life. Both the main part and substitute maintain ROHS3 compliance and MSL-1 rating, confirming suitability for standard industrial environments.

The E-Switch 100SP1T8B13VS2REH is electrically and mechanically compatible only for low-power applications operating at 20V or below with current requirements not exceeding 0.4VA. The reduced electrical life (40,000 cycles versus 100,000 cycles) and lower voltage/current ratings represent functional limitations that must be evaluated against specific application demands. Mounting type differences (Through Hole versus Panel Mount) may require mechanical redesign of the installation interface.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100SP1T8B13VS2REH directly replace the C&K 7101TPV3GE in all applications?

A: No. While both switches share identical circuit configuration (SPDT), panel cutout dimensions, and bushing thread specifications, the E-Switch substitute is rated for maximum 0.4VA at 20V, compared to the C&K rating of 5A at 120V AC. Substitution is valid only for applications with electrical requirements within the E-Switch ratings.

Q: What are the mechanical compatibility considerations?

A: Both parts feature identical panel cutout dimensions (11.91mm circular) and bushing thread (15/32-32), ensuring mechanical fit compatibility. However, the C&K uses panel-mount configuration while the E-Switch uses through-hole mounting, requiring different installation methods and potentially different PCB or panel layouts.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the C&K 7101TPV3GE and E-Switch 100SP1T8B13VS2REH are ROHS3 compliant with MSL-1 rating, meeting standard environmental and reliability requirements for industrial applications.

Q: How do electrical life ratings affect component selection?

A: The C&K 7101TPV3GE provides 100,000 switching cycles, while the E-Switch substitute provides 40,000 cycles. Applications with high switching frequency or extended operational life requirements should prioritize the higher-rated C&K component.

Q: What temperature operating range do both switches support?

A: Both switches operate across -30°C to 85°C, providing equivalent thermal performance for standard industrial and commercial environments.