C&K 7101SYZQE2 Toggle Switch SPDT 5A 120V Equivalent & Substitute Parts

Part Overview

The C&K 7101SYZQE2 is a panel-mount toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This switch is designed for On-On operation with a standard round actuator and solder lug termination. The part is active in production status with ROHS3 compliance and REACH affected designation.

Equivalent and substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits selection from multiple qualified manufacturers offering identical electrical and mechanical specifications.

Substiute Parts

7101SYZQE2

C&KIn Stock: 8627101SYZQE2 Datasheet

Current PartRFQ

100AWSP1T1B1M1QEH

E-SwitchIn Stock: 1931100AWSP1T1B1M1QEH Datasheet

SimilarRFQ

100SP1T1B3M1QEH

E-SwitchIn Stock: 1184100SP1T1B3M1QEH Datasheet

SimilarRFQ

100SP1T2B1M1QEH

E-SwitchIn Stock: 941100SP1T2B1M1QEH Datasheet

SimilarRFQ

100SP1T3B1M1QEH

E-SwitchIn Stock: 1127100SP1T3B1M1QEH Datasheet

SimilarRFQ

100SP1T4B1M1QEH

E-SwitchIn Stock: 2135100SP1T4B1M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the C&K 7101SYZQE2 is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-On)
• Current rating (5A AC/DC)
• Voltage ratings (120V AC / 28V DC)
• Mounting type (Panel Mount)
• Termination style (Solder Lug)
• Panel cutout dimensions (Circular 6.35mm Dia)
• Bushing thread specification (1/4-40)
• Actuator type (Standard Round)
• Operating temperature range (-30°C ~ 85°C)
• Actuator material (Brass, Chrome Plated)

All five E-Switch substitute parts (100AWSP1T1B1M1QEH, 100SP1T1B3M1QEH, 100SP1T2B1M1QEH, 100SP1T3B1M1QEH, 100SP1T4B1M1QEH) meet these core electrical and mechanical requirements. Variations exist only in actuator length and electrical life cycle ratings, which do not affect functional substitution capability within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and ROHS3 compliance. Selection among the five E-Switch alternatives is determined by actuator length requirements specific to panel design and enclosure geometry.

For applications requiring actuator length closest to the original C&K specification (10.67mm), the E-Switch 100SP1T1B3M1QEH (10.41mm) provides the tightest dimensional match.

The E-Switch 100AWSP1T1B1M1QEH offers IP67 ingress protection rating, providing enhanced environmental sealing compared to the base C&K part and other E-Switch alternatives. This variant is suitable for applications requiring dust and moisture resistance.

All E-Switch substitutes feature epoxy sealed terminals, enhancing reliability in humid or corrosive environments compared to the standard C&K design.

Electrical life cycle ratings differ between the main part (100,000 cycles) and E-Switch substitutes (30,000 to 40,000 cycles). Application duty cycle requirements must be evaluated against these specifications.

Frequently Asked Questions (FAQ)

Q: Can E-Switch parts directly replace the C&K 7101SYZQE2 in existing designs?

A: Yes. All five E-Switch substitute parts meet the core electrical and mechanical specifications: SPDT circuit, 5A at 120V AC / 28V DC, panel mount configuration with 1/4-40 bushing thread, and 6.35mm circular panel cutout. Solder lug termination and operating temperature range are identical. Physical installation is compatible without design modification.

Q: What is the significance of actuator length variation among the E-Switch options?

A: Actuator length affects panel protrusion and operator ergonomics. The C&K part specifies 10.67mm. E-Switch options range from 5.08mm to 16.26mm. Selection depends on available panel depth, aesthetic requirements, and tactile feedback preferences. Shorter actuators (5.08mm) suit shallow enclosures; longer actuators (13.97mm, 16.26mm) provide extended reach for recessed panel installations.

Q: Does the lower electrical life rating of E-Switch parts affect substitution suitability?

A: Electrical life rating reflects cycle endurance under specified load conditions. The C&K part is rated for 100,000 cycles; E-Switch substitutes range from 30,000 to 40,000 cycles. Substitution is valid only when application duty cycle does not exceed the E-Switch specification. High-frequency switching applications (exceeding 40,000 cycles) require the original C&K part or alternative evaluation.

Q: What is the advantage of the E-Switch 100AWSP1T1B1M1QEH variant with IP67 rating?

A: IP67 designation indicates dust-tight and waterproof performance. This variant is suitable for applications exposed to moisture, washdown environments, or sealed enclosures where environmental protection exceeds standard requirements. The base C&K part and other E-Switch variants lack this rating.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The C&K 7101SYZQE2 and all five E-Switch substitute parts are ROHS3 compliant, meeting lead-free and hazardous substance restrictions for regulated markets.

Q: What is the REACH status difference between the main part and substitutes?

A: The C&K 7101SYZQE2 is REACH Affected; the E-Switch substitutes are REACH Unaffected. This distinction affects regulatory documentation requirements in European supply chains. REACH Affected status requires additional substance declaration and compliance verification.