C&K 7101SYZGE2 Toggle Switch SPDT 5A 120V Equivalent & Substitute Parts

Part Overview

The C&K 7101SYZGE2 is a panel-mount toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This switch features a standard round actuator with solder lug termination and operates across -30°C to 85°C. The part is ROHS3 compliant and maintains an active product status with 804 units in current inventory.

Substitute parts are identified when equivalent electrical ratings, mechanical mounting specifications, and circuit configurations are maintained across alternative manufacturers. E-Switch manufactures five direct substitutes within the 100 and 100A series that meet the core electrical and mechanical requirements of the 7101SYZGE2.

Substiute Parts

7101SYZGE2

C&KIn Stock: 8727101SYZGE2 Datasheet

Current PartRFQ

100AWSP1T1B1M1QEH

E-SwitchIn Stock: 1931100AWSP1T1B1M1QEH Datasheet

SimilarRFQ

100SP1T1B3M1QEH

E-SwitchIn Stock: 1184100SP1T1B3M1QEH Datasheet

SimilarRFQ

100SP1T2B1M1QEH

E-SwitchIn Stock: 941100SP1T2B1M1QEH Datasheet

SimilarRFQ

100SP1T3B1M1QEH

E-SwitchIn Stock: 1127100SP1T3B1M1QEH Datasheet

SimilarRFQ

100SP1T4B1M1QEH

E-SwitchIn Stock: 2135100SP1T4B1M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7101SYZGE2 is determined by strict equivalence across the following parameters:

• Circuit configuration: SPDT with On-On function
• Electrical ratings: 5A (AC/DC), 120V AC, 28V DC minimum
• Mechanical interface: Panel mount with 6.35mm circular cutout and 1/4-40 bushing thread
• Termination: Solder lug connection
• Operating temperature: -30°C to 85°C range
• Actuator material: Brass, chrome-plated construction

All five E-Switch substitute parts (100AWSP1T1B1M1QEH, 100SP1T1B3M1QEH, 100SP1T2B1M1QEH, 100SP1T3B1M1QEH, 100SP1T4B1M1QEH) maintain these core electrical and mechanical specifications. Variations exist in actuator length and electrical life cycle ratings, which do not affect functional substitution within the defined parameter set.

Parameter Comparison

Engineering Selection Recommendations

All five E-Switch substitute parts maintain active product status and ROHS3 compliance equivalent to the 7101SYZGE2. Selection among substitutes should be based on actuator length requirements specific to panel geometry and application constraints.

For applications requiring standard actuator length near the original 10.67mm specification, 100SP1T1B3M1QEH and 100AWSP1T1B1M1QEH are functionally equivalent. The 100AWSP1T1B1M1QEH variant provides IP67 ingress protection, suitable for sealed enclosure applications.

For compact panel installations requiring minimal actuator protrusion, 100SP1T2B1M1QEH with 5.08mm actuator length is available. For applications requiring extended actuator reach, 100SP1T3B1M1QEH (13.97mm) and 100SP1T4B1M1QEH (16.26mm) accommodate deeper panel mounting requirements.

Electrical life cycle ratings differ across substitutes. The original 7101SYZGE2 specifies 100,000 cycles; E-Switch substitutes range from 30,000 to 40,000 cycles. Applications with high cycle count requirements should account for this specification variance.

Frequently Asked Questions (FAQ)

Q: Are all listed E-Switch parts direct substitutes for the C&K 7101SYZGE2?

A: Yes. All five E-Switch parts (100AWSP1T1B1M1QEH, 100SP1T1B3M1QEH, 100SP1T2B1M1QEH, 100SP1T3B1M1QEH, 100SP1T4B1M1QEH) meet the core electrical and mechanical specifications: SPDT circuit, 5A at 120V AC/28V DC, panel mount with 6.35mm cutout and 1/4-40 bushing thread, solder lug termination, and -30°C to 85°C operating range.

Q: What is the primary difference between the E-Switch substitute options?

A: Actuator length varies across the five substitutes: 10.41mm (100AWSP1T1B1M1QEH and 100SP1T1B3M1QEH), 5.08mm (100SP1T2B1M1QEH), 13.97mm (100SP1T3B1M1QEH), and 16.26mm (100SP1T4B1M1QEH). Selection depends on panel depth and actuator reach requirements. The 100AWSP1T1B1M1QEH also provides IP67 ingress protection.

Q: Does actuator length affect electrical performance?

A: No. Actuator length is a mechanical parameter that affects panel interface geometry only. All substitutes maintain identical electrical ratings and circuit function.

Q: How do electrical life cycle ratings compare?

A: The original 7101SYZGE2 specifies 100,000 cycles. E-Switch substitutes specify 30,000 cycles (100AWSP1T1B1M1QEH) or 40,000 cycles (remaining four parts). Applications requiring extended cycle life should evaluate this specification difference against duty cycle requirements.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed parts maintain ROHS3 compliance. The 100AWSP1T1B1M1QEH is REACH Unaffected; the original 7101SYZGE2 and remaining E-Switch substitutes are REACH Affected.

Q: Which substitute provides environmental sealing?

A: The 100AWSP1T1B1M1QEH provides IP67 ingress protection (dust tight, waterproof). Remaining substitutes do not specify ingress protection ratings.