Toggle Switch SPDT 7101SPYAV2GE Equivalent & Substitute Parts

Part Overview

The 7101SPYAV2GE is an active-status toggle switch manufactured by C&K, featuring SPDT (Single Pole Double Throw) circuitry with a 5A current rating at 120V AC and 28V DC. This panel-mount component utilizes a right-angle vertical configuration with PC pin termination and anti-rotation actuator design. The switch is specified for applications requiring reliable on-on switching functionality across industrial and commercial environments. Substitute parts are identified to address inventory availability, compliance requirements, or specific application constraints while maintaining electrical and mechanical compatibility within defined parameters.

Substiute Parts

7101SPYAV2GE

C&KIn Stock: 9927101SPYAV2GE Datasheet

Current PartRFQ

100SP1T1B1M7QEH

E-SwitchIn Stock: 1974100SP1T1B1M7QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7101SPYAV2GE is determined by strict equivalence across the following critical parameters:

• Electrical Compatibility: Circuit configuration (SPDT), switch function (On-On), current rating (5A AC/DC), voltage ratings (120V AC / 28V DC), and termination style (PC Pin) must be identical.
• Mechanical Compatibility: Mounting type (Panel Mount, Right Angle, Vertical), panel cutout dimensions (Circular - 6.35mm Dia), and bushing thread (1/4-40) must match to ensure physical interchangeability.
• Environmental Specifications: Operating temperature range (-30°C to 85°C) and epoxy sealed terminal construction must be maintained.

The identified substitute part 100SP1T1B1M7QEH from E-Switch meets all mandatory electrical and mechanical parameters, enabling direct functional replacement within the specified application constraints.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (7101SPYAV2GE): Select when RoHS non-compliant applications are acceptable and maximum electrical life (100,000 cycles) is required. This part is active-status and suitable for standard industrial switching applications.

Substitute Part (100SP1T1B1M7QEH): Select when ROHS3 compliance and REACH unaffected status are mandatory requirements. This E-Switch alternative provides equivalent electrical and mechanical performance for applications where regulatory compliance takes precedence. Note that electrical life rating is 40,000 cycles, which is lower than the primary part. The actuator type differs (Standard Round versus Anti-Rotation), and actuator length varies by 0.26mm, which may affect specific mechanical constraints in confined panel installations.

Both parts maintain identical electrical ratings, circuit configuration, and mechanical mounting specifications, ensuring functional interchangeability within the defined parameter set.

Frequently Asked Questions (FAQ)

Q: Can 100SP1T1B1M7QEH directly replace 7101SPYAV2GE in existing assemblies?

A: Yes, for electrical and mechanical functionality. Both parts share identical circuit configuration (SPDT), current rating (5A AC/DC), voltage ratings (120V AC / 28V DC), mounting type (Panel Mount, Right Angle, Vertical), panel cutout dimensions (6.35mm Dia), bushing thread (1/4-40), and termination style (PC Pin). However, the actuator type differs (Anti-Rotation versus Standard Round), and actuator length varies by 0.26mm. Verify that these mechanical differences do not conflict with panel geometry or actuator clearance requirements in your specific application.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Actuator design—7101SPYAV2GE uses anti-rotation design while 100SP1T1B1M7QEH uses standard round design; (2) Actuator length—7101SPYAV2GE is 10.67mm versus 10.41mm for 100SP1T1B1M7QEH; (3) Electrical life—7101SPYAV2GE rated for 100,000 cycles versus 40,000 cycles for 100SP1T1B1M7QEH; (4) Regulatory compliance—7101SPYAV2GE is RoHS non-compliant and REACH Affected, while 100SP1T1B1M7QEH is ROHS3 Compliant and REACH Unaffected.

Q: Which part should I select for a new design?

A: Selection depends on application requirements. If regulatory compliance (ROHS3, REACH unaffected) is mandatory, select 100SP1T1B1M7QEH. If maximum electrical life (100,000 cycles) and anti-rotation actuator design are critical, select 7101SPYAV2GE. Both parts are electrically and mechanically equivalent for standard SPDT switching applications at 5A / 120V AC.

Q: Are there packaging or inventory considerations?

A: Both parts are available in bulk packaging. Current inventory shows 976 pcs for 7101SPYAV2GE and 1934 pcs for 100SP1T1B1M7QEH. Verify availability with your supplier based on project timeline and volume requirements.

Q: What is the impact of the 0.26mm actuator length difference?

A: The actuator length variation is minor (10.67mm versus 10.41mm). This difference is unlikely to affect standard panel installations but should be verified if the application involves tight mechanical tolerances, confined panel spaces, or specific actuator clearance requirements.