Toggle Switch SPDT 7101SPDABE Equivalent & Substitute Parts

Part Overview

The C&K 7101SPDABE is an active production toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 0.4VA at 20V AC/DC. This panel-mount, right-angle switch is designed for applications requiring reliable on-on switching functionality with sealed terminals and extended operating temperature range. Substitute parts are identified when equivalent electrical ratings, mechanical mounting specifications, and circuit configurations are maintained across the allowed parameter set.

Substiute Parts

7101SPDABE

C&KIn Stock: 8667101SPDABE Datasheet

Current PartRFQ

34ASP11B1M6RT

Grayhill Inc.In Stock: 94434ASP11B1M6RT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7101SPDABE is determined by strict equivalence across the following parameters:

• Circuit configuration must be SPDT
• Switch function must be On-On
• Current rating must be 0.4VA (AC/DC)
• Voltage ratings must be 20V AC and 20V DC minimum
• Mounting type must be Panel Mount, Right Angle
• Panel cutout dimensions must be Circular 6.35mm Dia
• Bushing thread must be 1/4-40
• Termination style must be PC Pin
• Operating temperature range must encompass -30°C to 85°C
• Product status must be Active
• RoHS3 compliance is required

The Grayhill Inc. 34ASP11B1M6RT meets all mandatory electrical and mechanical parameters for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the C&K 7101SPDABE and Grayhill 34ASP11B1M6RT are active production components with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is based on availability, supply chain considerations, and application-specific requirements. The 7101SPDABE features epoxy sealed terminals, while the 34ASP11B1M6RT does not specify this feature. The 7101SPDABE supports 100,000 electrical cycles compared to 40,000 cycles for the 34ASP11B1M6RT. Both parts are suitable for applications within the specified voltage, current, and temperature parameters.

Frequently Asked Questions (FAQ)

Q: Can the Grayhill 34ASP11B1M6RT be used as a direct replacement for the C&K 7101SPDABE?

A: Yes. Both parts meet identical electrical ratings (0.4VA, 20V AC/DC), circuit configuration (SPDT On-On), and mechanical specifications (panel mount, 6.35mm circular cutout, 1/4-40 bushing thread, PC pin termination). Both are active production components with ROHS3 compliance and MSL 1 rating.

Q: What are the key differences between these two parts?

A: The primary differences are electrical life rating (7101SPDABE: 100,000 cycles vs. 34ASP11B1M6RT: 40,000 cycles) and terminal sealing (7101SPDABE features epoxy sealed terminals). The 7101SPDABE has an anti-rotation actuator type with 12.45mm length, while the 34ASP11B1M6RT has a standard round actuator with 10.41mm length.

Q: Are both parts suitable for the same panel cutout dimensions?

A: Yes. Both parts require a circular panel cutout of 6.35mm diameter and use a 1/4-40 bushing thread for mounting.

Q: What is the operating temperature range for both parts?

A: Both the 7101SPDABE and 34ASP11B1M6RT operate across -30°C to 85°C.

Q: Are there any compliance or regulatory differences?

A: Both parts are ROHS3 compliant, carry EAR99 ECCN classification, and share the same HTSUS code (8536.50.9065). The 7101SPDABE is REACH Affected, while the 34ASP11B1M6RT is REACH Unaffected.