C&K 7101SPCWCGE Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The C&K 7101SPCWCGE is an active production toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 5A at 120V AC and 28V DC. This panel-mount switch features anti-rotation actuator design, epoxy sealed terminals, and IP67 ingress protection suitable for industrial and sealed enclosure applications. Equivalent and substitute parts are identified based on matching electrical ratings, mechanical compatibility, and functional specifications to ensure direct replacement capability in existing designs.

Substiute Parts

7101SPCWCGE

C&KIn Stock: 10237101SPCWCGE Datasheet

Current PartRFQ

100SP1T1B1M2QEH

E-SwitchIn Stock: 4098100SP1T1B1M2QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7101SPCWCGE is determined by the following critical parameters:

• Circuit Configuration: SPDT (Single Pole Double Throw) - mandatory match
• Current Rating: 5A (AC/DC) - must meet or exceed
• Voltage Ratings: 120V AC and 28V DC - must meet or exceed
• Mounting Type: Panel Mount with 1/4-40 bushing thread and 6.35mm circular cutout - mechanical compatibility requirement
• Termination Style: PC Pin - electrical connection compatibility
• Operating Temperature Range: -30°C to 85°C - environmental compatibility
• Switch Function: On-On configuration

The E-Switch 100SP1T1B1M2QEH meets all critical substitution criteria, matching the electrical ratings, circuit configuration, mechanical mounting specifications, and environmental operating range of the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the C&K 7101SPCWCGE and E-Switch 100SP1T1B1M2QEH are active production components with identical electrical and mechanical specifications. Selection between these parts should be based on the following factors:

Regulatory Compliance: The E-Switch 100SP1T1B1M2QEH carries ROHS3 compliance and is REACH Unaffected, providing advantages for applications subject to European Union environmental regulations. The C&K 7101SPCWCGE is RoHS non-compliant and REACH Affected.

Electrical Life Rating: The C&K 7101SPCWCGE is rated for 100,000 electrical cycles, while the E-Switch 100SP1T1B1M2QEH is rated for 40,000 cycles. Applications requiring extended operational life should prioritize the C&K component.

Actuator Design: The C&K 7101SPCWCGE features an anti-rotation actuator, while the E-Switch 100SP1T1B1M2QEH uses a standard round actuator. Anti-rotation design prevents unintended rotation during panel mounting operations.

Availability: The E-Switch 100SP1T1B1M2QEH has higher inventory availability (4017 units) compared to the C&K 7101SPCWCGE (948 units).

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100SP1T1B1M2QEH directly replace the C&K 7101SPCWCGE in existing designs?

A: Yes. Both components share identical electrical ratings (5A, 120V AC, 28V DC), circuit configuration (SPDT), mechanical mounting specifications (1/4-40 bushing, 6.35mm circular cutout), and termination style (PC Pin). Direct mechanical and electrical substitution is supported.

Q: What are the differences between these two parts?

A: The primary differences are electrical life rating (C&K: 100,000 cycles vs. E-Switch: 40,000 cycles), actuator design (C&K: anti-rotation vs. E-Switch: standard round), and regulatory compliance (E-Switch: ROHS3 compliant and REACH Unaffected vs. C&K: RoHS non-compliant and REACH Affected).

Q: Which part should I select for high-cycle applications?

A: The C&K 7101SPCWCGE is rated for 100,000 electrical cycles, making it suitable for applications requiring extended operational life. The E-Switch 100SP1T1B1M2QEH is rated for 40,000 cycles.

Q: Are there ingress protection differences between these parts?

A: The C&K 7101SPCWCGE is rated IP67 (dust tight, waterproof). The E-Switch 100SP1T1B1M2QEH does not specify an ingress protection rating in the provided data.

Q: Do both parts support the same panel cutout and bushing specifications?

A: Yes. Both components require a circular 6.35mm diameter panel cutout and 1/4-40 bushing thread, ensuring mechanical compatibility in existing panel designs.

Q: Which part meets current environmental regulations?

A: The E-Switch 100SP1T1B1M2QEH is ROHS3 compliant and REACH Unaffected. The C&K 7101SPCWCGE is RoHS non-compliant and REACH Affected. Applications subject to EU environmental directives should specify the E-Switch component.