Equivalent & Substitute Parts for 7101SH3AV2GE

Part Overview

The C&K 7101SH3AV2GE is an SPDT toggle switch rated for 5A at 120V AC and 28V DC, designed for panel mount applications with right angle vertical orientation. This switch is currently active in production with 703 units in stock. Alternative equivalent parts may be required due to supply constraints, design revisions, or specific application requirements where substitute models meet identical electrical and mechanical specifications.

Substiute Parts

7101SH3AV2GE

C&KIn Stock: 7277101SH3AV2GE Datasheet

Current PartRFQ

100SP1T1B1M7QEH

E-SwitchIn Stock: 1974100SP1T1B1M7QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E-Switch 100SP1T1B1M7QEH qualifies as an equivalent substitute for the 7101SH3AV2GE based on the following critical parameters:

• Electrical Equivalence: Both parts share identical SPDT circuit configuration, On-On switch function, 5A current rating (AC/DC), 120V AC rating, and 28V DC rating
• Mechanical Compatibility: Both feature panel mount right angle vertical orientation with identical 6.35mm circular panel cutout and 1/4-40 bushing thread
• Actuator Specifications: Both use standard round actuators with PC pin termination and epoxy sealed terminals
• Environmental Compliance: Both operate across -30°C to 85°C temperature range and meet ROHS3 compliance requirements
• Physical Interface: Identical mounting footprint and panel interface dimensions ensure direct mechanical substitution

Parameter Comparison

Engineering Selection Recommendations

Both the 7101SH3AV2GE and 100SP1T1B1M7QEH are active production parts meeting ROHS3 compliance. The primary distinction lies in electrical life rating and REACH regulatory status. The C&K 7101SH3AV2GE provides 100,000 cycle electrical life, while the E-Switch 100SP1T1B1M7QEH provides 40,000 cycles. For applications requiring extended operational life or higher cycle counts, the 7101SH3AV2GE is the preferred selection. The E-Switch 100SP1T1B1M7QEH is suitable for applications with lower cycle requirements and where REACH unaffected status is advantageous. Both parts share identical electrical ratings, mechanical interfaces, and environmental operating ranges, ensuring functional interchangeability within their respective cycle life specifications.

Frequently Asked Questions (FAQ)

Q: Can the 100SP1T1B1M7QEH directly replace the 7101SH3AV2GE in existing designs?

A: Yes, both parts share identical electrical ratings (5A, 120V AC, 28V DC), circuit configuration (SPDT), and mechanical mounting interfaces (panel mount, 6.35mm cutout, 1/4-40 thread). Direct mechanical and electrical substitution is supported.

Q: What is the significance of the 60,000 cycle difference in electrical life?

A: The 7101SH3AV2GE is rated for 100,000 cycles while the 100SP1T1B1M7QEH is rated for 40,000 cycles. Applications with high switching frequency or extended operational life should specify the higher-rated part.

Q: Are there packaging differences between these parts?

A: Both parts are supplied in bulk packaging. No special packaging considerations affect substitution.

Q: What does REACH Affected versus REACH Unaffected mean for component selection?

A: REACH Affected indicates the part contains substances of concern requiring compliance documentation. REACH Unaffected indicates no such substances are present. Selection depends on end-use regulatory requirements and supply chain documentation needs.

Q: Are the actuator length differences significant?

A: The actuator lengths differ by 0.25mm (10.16mm versus 10.41mm). This variance is within typical manufacturing tolerances for panel-mounted toggle switches and does not affect functional compatibility or panel interface.

Q: Do both parts meet the same environmental operating range?

A: Yes, both parts operate across -30°C to 85°C, ensuring equivalent thermal performance in specified applications.