Toggle Switch SPDT 7101SD9AGE Equivalent & Substitute Parts

Part Overview

The C&K 7101SD9AGE is an active SPDT toggle switch rated for 5A at 120V AC and 28V DC. This through-hole, right-angle mounted component features epoxy sealed terminals and is designed for applications requiring reliable switching across a wide operating temperature range of -30°C to 85°C. The part maintains ROHS3 compliance and unlimited moisture sensitivity rating, making it suitable for industrial and commercial switching applications. Substitute parts may be required due to inventory constraints, lead time considerations, or application-specific performance requirements.

Substiute Parts

7101SD9AGE

C&KIn Stock: 10827101SD9AGE Datasheet

Current PartRFQ

100SP1T1B4M6RE

E-SwitchIn Stock: 1663100SP1T1B4M6RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7101SD9AGE is determined by strict alignment of core electrical and mechanical parameters. The following criteria establish valid substitute relationships:

Critical Matching Parameters:

• Circuit configuration (SPDT required)
• Switch function (On-On operation)
• Mounting type (Through Hole, Right Angle)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C minimum)
• Actuator type (Standard Round)
• Epoxy sealed terminal construction

Electrical Performance Constraints: Substitute parts must maintain or exceed the voltage and current ratings of the primary application. The 7101SD9AGE operates at 5A (AC/DC) with 120V AC and 28V DC ratings. Substitute candidates must support these electrical specifications or be derated for lower-voltage applications.

Compliance Requirements: All substitute parts must maintain ROHS3 compliance and MSL rating of 1 (Unlimited) to ensure compatibility with standard manufacturing and storage protocols.

Parameter Comparison

Engineering Selection Recommendations

The E-Switch 100SP1T1B4M6RE shares identical mechanical and functional characteristics with the 7101SD9AGE, including circuit topology, mounting configuration, and operating temperature range. Both components maintain ROHS3 compliance and unlimited moisture sensitivity ratings, ensuring compatibility with standard manufacturing environments.

The 100SP1T1B4M6RE operates at reduced electrical specifications: 0.4VA at 20V AC/DC versus the 7101SD9AGE's 5A at 120V AC and 28V DC. This component is suitable for low-voltage switching applications where current and voltage requirements do not exceed its rated specifications. The electrical life rating of 40,000 cycles is lower than the primary part's 100,000 cycles, indicating reduced duty cycle capability.

Selection between these components depends on application voltage and current requirements. The 7101SD9AGE is specified for higher-power switching applications, while the 100SP1T1B4M6RE is appropriate for low-voltage control circuits and signal switching where electrical demands are substantially lower.

Frequently Asked Questions (FAQ)

Q: Can the E-Switch 100SP1T1B4M6RE directly replace the C&K 7101SD9AGE in all applications?

A: No. The 100SP1T1B4M6RE is rated for 0.4VA at 20V AC/DC, while the 7101SD9AGE is rated for 5A at 120V AC and 28V DC. Direct substitution is only valid for applications operating within the lower electrical specifications of the E-Switch component.

Q: What are the key mechanical similarities between these parts?

A: Both components feature SPDT On-On switching with through-hole, right-angle mounting and PC pin termination. Both use standard round brass, chrome-plated actuators and maintain identical operating temperature ranges of -30°C to 85°C.

Q: Are there compliance differences between the two parts?

A: Both parts are ROHS3 compliant with MSL rating 1 (Unlimited). The 7101SD9AGE is REACH Affected, while the 100SP1T1B4M6RE is REACH Unaffected. Application requirements may necessitate consideration of REACH compliance status.

Q: How do electrical life ratings affect component selection?

A: The 7101SD9AGE is rated for 100,000 electrical cycles, while the 100SP1T1B4M6RE is rated for 40,000 cycles. Applications requiring frequent switching operations should prioritize the higher-rated component to ensure extended service life.

Q: What packaging differences exist between these parts?

A: The 7101SD9AGE is supplied in Tray packaging, while the 100SP1T1B4M6RE is supplied in Bulk packaging. Packaging selection may affect inventory management and component handling procedures.