Equivalent & Substitute Parts for 7101SCWZGE

Part Overview

The 7101SCWZGE is an active SPDT toggle switch manufactured by C&K, designed for panel mount applications with a 5A rating at 120V AC and 28V DC. This switch features a standard round actuator with solder lug termination and IP67 ingress protection, making it suitable for sealed enclosure applications. Finding equivalent substitute parts becomes necessary when managing inventory constraints, ensuring supply chain continuity, or matching specific procurement requirements while maintaining functional compatibility.

Substiute Parts

7101SCWZGE

C&KIn Stock: 11077101SCWZGE Datasheet

Current PartRFQ

100SP1T1B9M1QEH

E-SwitchIn Stock: 1517100SP1T1B9M1QEH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 7101SCWZGE is determined by strict alignment of the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-On)
• Current rating (5A AC/DC)
• Voltage ratings (120V AC, 28V DC)
• Mounting type (Panel Mount)
• Actuator type (Standard Round)
• Panel cutout dimensions (Circular - 6.35mm Dia)
• Bushing thread specification (1/4-40)
• Termination style (Solder Lug)
• Operating temperature range (-30°C ~ 85°C)
• RoHS compliance status (ROHS3 Compliant)

The substitute part 100SP1T1B9M1QEH from E-Switch meets all these critical parameters, enabling direct functional substitution in panel mount SPDT toggle switch applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 7101SCWZGE and 100SP1T1B9M1QEH are active products with ROHS3 compliance, meeting current regulatory requirements. The 7101SCWZGE provides specified IP67 ingress protection and higher electrical life rating of 100,000 cycles, making it the preferred choice for sealed enclosure applications requiring extended operational life. The 100SP1T1B9M1QEH serves as a functional substitute where IP67 specification is not required and lower cycle count is acceptable. Selection should be based on application-specific requirements for environmental sealing and expected operational cycle count.

Frequently Asked Questions (FAQ)

Q: Can 100SP1T1B9M1QEH directly replace 7101SCWZGE in all applications?

A: The 100SP1T1B9M1QEH matches all critical electrical and mechanical parameters including circuit configuration, current/voltage ratings, mounting dimensions, and termination style. However, applications requiring IP67 ingress protection or exceeding 40,000 electrical cycles should use the 7101SCWZGE.

Q: What is the difference in actuator length between these parts?

A: The 7101SCWZGE has an actuator length of 10.67mm while the 100SP1T1B9M1QEH measures 10.41mm. This 0.26mm difference is within typical mechanical tolerance for panel mount toggle switches and does not affect functional compatibility.

Q: Are both parts suitable for the same panel cutout?

A: Yes. Both parts require a circular panel cutout of 6.35mm diameter and use identical 1/4-40 bushing thread specifications, enabling installation in the same panel configuration.

Q: What compliance differences exist between these parts?

A: Both parts are ROHS3 compliant. The 7101SCWZGE is classified as REACH Affected while the 100SP1T1B9M1QEH is REACH Unaffected. Applications subject to REACH regulations should confirm compliance requirements with procurement specifications.

Q: Which part should be selected for high-cycle applications?

A: The 7101SCWZGE is rated for 100,000 electrical cycles compared to 40,000 cycles for the 100SP1T1B9M1QEH. Applications exceeding 40,000 cycles require the 7101SCWZGE.