Equivalent & Substitute Parts for 7101MPD9AV2GE

Part Overview

The 7101MPD9AV2GE is an SPDT toggle switch manufactured by C&K, designed for through-hole mounting in right-angle vertical orientation. This switch is rated for 5A at 120V AC and 28V DC, with an operating temperature range of -30°C to 85°C. The part is currently active in production with 799 units in stock. Alternative components may be required due to inventory constraints, lead time considerations, or specific application requirements where substitute electrical and mechanical parameters are acceptable.

Substiute Parts

7101MPD9AV2GE

C&KIn Stock: 8237101MPD9AV2GE Datasheet

Current PartRFQ

100SP1T2B4M7QE

E-SwitchIn Stock: 3808100SP1T2B4M7QE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 100SP1T2B4M7QE from E-Switch qualifies as a substitute for the 7101MPD9AV2GE based on the following critical parameters:

• Circuit configuration matches: both are SPDT switches
• Switch function matches: both are On-On configuration
• Current rating matches: both rated for 5A (AC/DC)
• Voltage ratings match: both rated for 120V AC and 28V DC
• Mounting type matches: both are through-hole, right-angle, vertical orientation
• Termination style matches: both use PC Pin termination
• Operating temperature range matches: both operate from -30°C to 85°C
• Bushing thread matches: both are unthreaded
• Features match: both have epoxy sealed terminals
• RoHS compliance matches: both are ROHS3 compliant

Differences exist in actuator type, actuator length, and electrical life cycle rating, which do not prevent substitution when these variations are acceptable for the application.

Parameter Comparison

Engineering Selection Recommendations

Both the 7101MPD9AV2GE and 100SP1T2B4M7QE are active production components with ROHS3 compliance and identical electrical ratings. Selection between these parts should be based on:

• Actuator length requirements: the 7101MPD9AV2GE provides 6.86mm actuator length versus 5.08mm for the 100SP1T2B4M7QE
• Actuator type preference: the 7101MPD9AV2GE features anti-rotation design while the 100SP1T2B4M7QE uses standard round actuator
• Electrical life cycle expectations: the 7101MPD9AV2GE is rated for 100,000 cycles compared to 40,000 cycles for the 100SP1T2B4M7QE
• Inventory availability: the 100SP1T2B4M7QE has higher stock availability at 3,727 units

Frequently Asked Questions (FAQ)

Q: Can the 100SP1T2B4M7QE replace the 7101MPD9AV2GE in my application?

A: Yes, provided that the differences in actuator length (5.08mm versus 6.86mm), actuator type (standard round versus anti-rotation), and electrical life rating (40,000 versus 100,000 cycles) are acceptable for your specific circuit design and operational requirements.

Q: Are the electrical ratings identical between these two parts?

A: Yes. Both switches are rated for 5A at 120V AC and 28V DC, with identical SPDT configuration, On-On function, and operating temperature range of -30°C to 85°C.

Q: What is the difference in actuator design between these parts?

A: The 7101MPD9AV2GE features an anti-rotation actuator design at 6.86mm length, while the 100SP1T2B4M7QE uses a standard round actuator at 5.08mm length. The anti-rotation design may provide additional mechanical stability in certain mounting configurations.

Q: Do both parts meet RoHS requirements?

A: Yes. Both the 7101MPD9AV2GE and 100SP1T2B4M7QE are ROHS3 compliant with moisture sensitivity level 1 (unlimited).

Q: What is the electrical life difference, and does it matter for my application?

A: The 7101MPD9AV2GE is rated for 100,000 electrical cycles while the 100SP1T2B4M7QE is rated for 40,000 cycles. Selection depends on the expected number of switch actuations over the product lifetime.

Q: Are the termination styles compatible with my PCB design?

A: Both parts use PC Pin termination style and are designed for through-hole mounting in right-angle vertical orientation, ensuring compatibility with standard PCB layouts designed for either component.