C&K 7101MPD9AME Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The C&K 7101MPD9AME is a toggle switch with Single Pole Double Throw (SPDT) configuration, rated for 5A at 120V AC and 28V DC. This through-hole, right-angle mounted switch features an anti-rotation actuator and epoxy sealed terminals, designed for applications requiring reliable switching in the -30°C to 85°C operating range. The 7101MPD9AME is classified as obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications.

Substiute Parts

7101MPD9AME

C&KIn Stock: 6997101MPD9AME Datasheet

Current PartRFQ

7101MPD9ASE

C&KIn Stock: 11167101MPD9ASE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 7101MPD9AME is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-On)
• Current rating (5A AC/DC)
• Voltage ratings (120V AC, 28V DC)
• Mounting type (Through Hole, Right Angle)
• Actuator specifications (Anti-Rotation, 6.86mm length)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Electrical life (100,000 cycles)

The C&K 7101MPD9ASE meets all these parameters and is classified as an active product, making it a direct functional equivalent for the obsolete 7101MPD9AME.

Parameter Comparison

Engineering Selection Recommendations

The C&K 7101MPD9ASE is the direct substitute for the obsolete 7101MPD9AME. Both parts maintain identical electrical and mechanical specifications across all critical parameters. The 7101MPD9ASE carries active product status, ensuring availability and ongoing manufacturer support. Both parts comply with RoHS standards and carry identical moisture sensitivity and export classification ratings. The substitution presents no functional or compliance barriers for applications currently using the 7101MPD9AME.

Frequently Asked Questions (FAQ)

Q: Can the 7101MPD9ASE directly replace the 7101MPD9AME in existing designs?

A: Yes. The 7101MPD9ASE is functionally identical to the 7101MPD9AME across all electrical and mechanical parameters, including circuit configuration, current and voltage ratings, mounting type, actuator specifications, and operating temperature range. No design modifications are required.

Q: What is the primary difference between these two parts?

A: The 7101MPD9AME is obsolete, while the 7101MPD9ASE is an active product. Both parts are electrically and mechanically equivalent.

Q: Are there any compliance differences between the two parts?

A: Both parts comply with RoHS standards and carry identical moisture sensitivity levels (MSL 1), ECCN classification (EAR99), and HTSUS codes. The 7101MPD9ASE is REACH Affected, while the 7101MPD9AME is REACH Unaffected; however, this does not affect functional substitution.

Q: What are the key parameters that define substitution eligibility for this switch?

A: Substitution is determined by equivalence in circuit configuration (SPDT), current rating (5A AC/DC), voltage ratings (120V AC, 28V DC), mounting type (Through Hole, Right Angle), actuator specifications (Anti-Rotation, 6.86mm), termination style (PC Pin), and operating temperature range (-30°C to 85°C).

Q: Is the 7101MPD9ASE available in the same packaging as the 7101MPD9AME?

A: Both parts use identical through-hole, right-angle mounting with PC pin termination. No packaging or footprint modifications are necessary for substitution.