SCHURTER 7100.1163.13 Equivalent & Substitute Parts

Part Overview

The SCHURTER 7100.1163.13 is a board mount fuse rated for 630 mA at 250 V AC/DC with fast blow response characteristics. This through-hole radial fuse is designed for circuit protection in applications requiring reliable overcurrent interruption. The part is currently active in production with full inventory availability. Substitute parts are identified to provide alternative sourcing options while maintaining identical electrical and mechanical specifications.

Substiute Parts

7100.1163.13

SCHURTER Inc.In Stock: 10997100.1163.13 Datasheet

Current PartRFQ

7100.1063.13

SCHURTER Inc.In Stock: 12667100.1063.13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 7100.1163.13 are identified based on exact parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Current Rating: 630 mA
• Voltage Rating: 250 V AC and 250 V DC
• Response Time: Fast Blow
• Mounting Type: Through Hole
• Package Type: Radial, Box
• Breaking Capacity: 35 A @ Rated Voltage
• Melting I²t: 0.1
• Physical Dimensions: 11.50 mm × 5.00 mm × 8.00 mm
• RoHS Compliance: ROHS3 Compliant
• Approval Agency: cURus

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both the SCHURTER 7100.1163.13 and 7100.1063.13 are active production parts with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability and lead time requirements. The 7100.1063.13 offers 1188 pieces in stock compared to 1061 pieces for the 7100.1163.13. Both parts carry ROHS3 compliance and cURus approval certification, meeting regulatory requirements for circuit protection applications. The identical breaking capacity of 35 A and melting I²t of 0.1 ensure equivalent performance in overcurrent protection scenarios.

Frequently Asked Questions (FAQ)

Q: Can the 7100.1063.13 be used as a direct replacement for the 7100.1163.13?

A: Yes. Both parts are parametric equivalents with identical current ratings, voltage ratings, response time, mounting type, package configuration, breaking capacity, and physical dimensions. They are interchangeable for circuit protection applications.

Q: Are there any differences in compliance or certification between these parts?

A: No. Both parts carry identical RoHS3 compliance status and cURus approval certification. They meet the same regulatory requirements.

Q: What is the significance of the 630 mA current rating?

A: The 630 mA rating specifies the fuse's nominal trip current. This value determines the maximum continuous current the fuse can carry before interrupting the circuit during an overcurrent event.

Q: Does the fast blow response time affect substitution compatibility?

A: The fast blow characteristic is identical across both parts. This response time classification is a critical parameter for substitution and must remain constant to maintain circuit protection performance.

Q: Are the physical dimensions identical between substitute parts?

A: Yes. Both parts measure 11.50 mm length × 5.00 mm width × 8.00 mm height. Identical dimensions ensure proper fit in through-hole radial mounting applications.

Q: What does the melting I²t value of 0.1 represent?

A: The melting I²t is a thermal energy parameter that characterizes the fuse's response to overcurrent conditions. An identical value of 0.1 across substitute parts ensures equivalent thermal protection characteristics.